Items where Division is "Faculty of Applied Sciences" and Year is 2012

A

Abd Kadir, Muhammad Hafiz (2012) Properties of oil palm frond - plastic composite (elaeis guineensis) / Muhammad Hafiz Abd Kadir. [Student Project] Faculty of Applied Sciences. (Unpublished)

Abdul Rahim, Nur Farah Dayana and Zakariya, Norhidayu and Ismail, Nor Izati and Muhammad, Muhd Nasharuddin and Abdul Halim, Mohd Hariz Hifzuddin (2012) Tree species composition of 0.1 ha plot at UiTM Jengka education forest (line 13). [Student Project] (Unpublished)

Abdullah, Nor Hidayani (2012) Properties of wood plastic composites (WPC) from Batai spp. (Paraserianthes falcataria) / Nor Hidayani Abdullah. [Student Project] (Unpublished)

Abdullah Khir, Azizul Arifin (2012) Properties of particleboard from Kenaf (hibiscus cannabinus) core and acacia (acacia mangium) / Azizul Arifin Abdullah Khir. [Student Project] (Unpublished)

Abu Bakar, Noor Shakirah and Sapeen, Lily Fazlinda (2012) Fiber morphology of Jelawai (Terminilia spp). [Student Project] (Unpublished)

Abu Hassan, Muhd Fazli and Zainon, Muhd Hasshimi and Ahmok, Nur Leeyana and Jasni, Nur Aziah (2012) Shrinkage properties of Oil Palm Trunk (OPT). [Student Project] (Unpublished)

Ahmad Shuhor, Iqbal Zahin and Zulkafli, Muhammad Nizar Asyraf and Hassan, Muhammad Hafizuddin and Mohamad Pauzi, Mohamad Hafiz and Saris, Nurul Hidayah (2012) Mechanical properties of wood plastic composite from Kelempayan species (Neolamarckia cadamba). [Student Project] (Unpublished)

Amirusham, Rostam (2012) Export of wood product of Malaysia (2004 - 2011). [Student Project] (Unpublished)

Ansar, Mohd Shafie (2012) Drying defect of oil palm lumber in relation to tree portion and layer using quick drying test / Mohd Shafie Ansar. [Student Project] (Unpublished)

B

Buang, Noradila and Mohd Yusof, Suraya and Abdullah, Nor Afifah (2012) Properties of paper from Oil Palm Fronds (OPF) by using kraft pulping process. [Student Project] (Unpublished)

F

Firdaus, Muhammad Adib and Zulkepli, Muhammad Faiz Syukri and Madzki, Mohamad Mustaqim (2012) Production of longboard from banana fiber (Musa Acuminata) and oil palm fiber (Elaeis Guineensis). [Student Project] (Unpublished)

G

Ghazali, Munirah (2012) Finishing: traditional and modern technique / Munirah Ghazali. [Student Project] (Unpublished)

H

Hamdan, Nurfarhana and Mohammad, Nurul Asikin and Ahmad, Nurulnajihah (2012) Dimensional stability properties of oil palm trunk (Elaeis Guineensis). [Student Project] (Unpublished)

Hashim, Farhanim and Muerkan, Noralbaniah and Abdullah, Intan Azmida (2012) Mechanical pulping from Kenaf. [Student Project] (Unpublished)

Herman, Amrah and Mohamed Nudin, Faezah (2012) The properties of paper from Kenaf bast fiber according to 20%, 25% and 30% active alkali using soda-aq pulping. [Student Project] (Unpublished)

Husin, Mohd Najib (2012) Mechanical properties of Kedondong, Meranti, and Mersawa affect by steaming treatment / Mohd Najib Husin. [Student Project] (Unpublished)

I

Ibrahim, Nor Afizah (2012) The effect of quick drying test on mersawa species / Nor Afizah Ibrahim. [Student Project] (Unpublished)

Isa, Siti Anis Aniha (2012) Assessment of mechanical properties based on different density of particleboard from sentang spp (azadirachta excelsa) / Siti Anis Aniha Isa. [Student Project] (Unpublished)

Ismail, Bukhari and Mohd Noor, Mohd Nazrin and Wan Ibrahim, Wan Muhammad Hilmi (2012) Properties of three layered hybrid particleboard from sawdust and Acacia Mangium. [Student Project] (Unpublished)

Ismail, Izwan (2012) Bending properties of finger jointed from oil palm lumber (OPL) / Izwan Ismail. [Student Project] (Unpublished)

J

Jamel, Mohamad Nazri and Muhammad Sabri, Muhammad Hafizuddin and Medan, Paulus Inggu and Abdul Rani, Rizal Shafuan (2012) Properties of paper from Oil Palm Frond (OPF) by using soda pulping process. [Student Project] (Unpublished)

Johar, Shuhaila (2012) Properties of particleboard produced from admixture of acacia mangium and sentang (azadirachta excelsa) at different particle size / Shuhaila Johar. [Student Project] (Unpublished)

Johari, Khairul Azhar (2012) Properties of particleboard from admixture Petai Belalang (leucaena leucocephala) and Kenaf core (hibiscus cannabinus) / Khairul Azhar Johari. [Student Project] (Unpublished)

K

Kapli, Khairul Azelan (2012) Properties of three-layer particleboard from rubberwood and leucaena leucocephala / Khairul Azelan Kapli. [Student Project] (Unpublished)

Kasim, Salenda (2012) Bending strength of mersawa at different tree portion / Salenda Kasim. [Student Project] (Unpublished)

Khairudin, Muhamad Salimi (2012) Furniture design: Brick Chair / Muhamad Salimi Khairudin. [Student Project] (Unpublished)

L

Lias, Hazwani (2012) Properties of three layer particleboard from Batai spp (paraserianthes falcataria) / Hazwani Lias. [Student Project] (Unpublished)

M

M Razip, M Rafais (2012) Strength properties of finger jointed wood from fast growing species / M Rafais M Razip. [Student Project] (Unpublished)

Mahyuddin, Noraini and Ab Jalil, Faza Farhana and Fadzil, Muhammad Faiz and Abd Shukor, Ahmed Faiz and Abdullah, Nik Mohd Izwan (2012) Tree species composition of 0.1 ha plot at UiTM Jengka education forest (line 12). [Student Project] (Unpublished)

Maidin, Iffah Izzah (2012) Properties of wood cement board (WCB) made from Sentang (Azadirachta excelsa) particles / Iffah Izzah Maidin. [Student Project] (Unpublished)

Mat Din, Muhamad Huzwa and Mohd Sanip, Muhamad Najaaid Izzat and Ahmad Nadzri, Seri Nur Iman Hidayah (2012) Extractives and ash content of oil palm trunk (Elaeis Guineensis). [Student Project] (Unpublished)

Mat Rewai, Ahmad Aizat and Abdullah, Azuandi and Abdul Razak, Mohd Muhaimim and Yahaya, Muhammad Syafiq (2012) Chemical composition of Oil Palm Frond (OPF) at different age. [Student Project] (Unpublished)

Mat Zain, Mohd Zulkhanain and Ab Manan, Mohd Yusmizan and Ishak, Muhammad Najib and Mahpar, Mohd Luqman Hakiem (2012) Trees species composition of 0.1 - ha plot at UiTM Jengka education forest (line 11). [Student Project] (Unpublished)

Md Aliudin, Mohd Amar and Md Saad, Muhamad Hafiz and Md Daud, Muhamad Basri (2012) Mechanical properties of juvenile Acacia Mangium. [Student Project] (Unpublished)

Md Yunos, Aishah (2012) Noise pollution in wooden furniture industry / Aishah Md Yunos. [Student Project] (Unpublished)

Moftar, Mohammad Faize and Che Lah, Che Mohamad Azrul and Omar, Alias and Mat Yuti, Muhamad Arbain (2012) Double swing chair. [Student Project] (Unpublished)

Mohamad, Azlan (2012) Hardness properties of rubberwood finishing effected by finishing materials and curing variables / Azlan Mohamad. [Student Project] (Unpublished)

Mohamad Afandi, Mohamad Hafiz Helmy and Mat Hussin, Mohd Ikhram Azzarudin and Pauzi, Mohd Khairy (2012) Mechanical & physical properties of wood cement board from Kelempayan (Anthocepalus Chinensis) & Acacia (Acacia Mangium) using different particle sizes. [Student Project] (Unpublished)

Mohamad Mokhtar, Noorul Tamtini and Ashraf Nik Soh, Nik Muhamad and Setaffa, Ahmad Safwan and Sa'ad, Muhammad Fitri (2012) Manucture of baby furniture from Kelempayan wood (Neolamarkia Cadamba). [Student Project] (Unpublished)

Mohd Jamal, Mohd Abdul Hafiz and Mohd Nordin, Muhammad Norsyahir and Samsuddin, Mohd Izwan Sharmimi (2012) Organosolv pulping of Oil Palm Frond (OPF): effect of beating on pulp and paper properties. [Student Project] (Unpublished)

Mohd Mokhtar, Izyan Lyana (2012) Air pollution in Malaysian furniture industry / Izyan Lyana Mohd Mokhtar. [Student Project] (Unpublished)

Mohd Nazip, Muhammad Nadzim and Abdullah, Syazwani and Rais, Mohd Rafsan and Mat Anuar, Muhammad Shahedie (2012) The produce of Matang mangrove in Kuala Sepetang, Perak. [Student Project] (Unpublished)

Mohd Noh, Faridwajdi (2012) Mechanical properties of kedondong, meranti and mersawa effected by boiling treatments / Faridwajdi Mohd Noh. [Student Project] (Unpublished)

Mohd Sahman, Syaiful Hanif and Rosli, Muhammad Syazwan (2012) The sawmill practices in Malaysia. [Student Project] (Unpublished)

Mohd Tahir, Muhammad Rahman (2012) Properties of particle and strand board from hevea brasiliensis and leucaena leucocephala / Muhammad Rahman Mohd Tahir. [Student Project] (Unpublished)

Mohd Yazied, Mohamad Alif (2012) Malaysian hardwood timbers: adhesion of finishing material from different timber species and under coating layers / Mohamad Alif Mohd Yazied. [Student Project] (Unpublished)

Mokhtar, Norain (2012) Finishing properties of polyurethane and acid catalyst based coating on bamboo stripped board / Norain Mokhtar. [Student Project] (Unpublished)

Mustamin, Muliadi and Ismail, Nur Isfarina and Muda, Norhayati and Mohamad, Munirah (2012) Tree species composition of 0.1 ha plot at UiTM Jengka education forest (line 15). [Student Project] (Unpublished)

Mustapa, Imran (2012) The implementation of 5s for improving organization in UiTM furniture workshop / Imran Mustapa. [Student Project] (Unpublished)

N

Nordin, Nor Amira and Nurulhisam, Nur Hidayah and Mohd Jaafar, Nor Salhida Sahira (2012) Chemical properties of Bambusa Heterostachya (Buluh Galah). [Student Project] (Unpublished)

O

Othman, Aiman Amirul Firdaus and Mohd Noor, Mohd Afif and Wan Rafai, Wan Nur Sheila Anis (2012) Mechanical and physical properties of wood plastic composite from oil palm frond. [Student Project] (Unpublished)

R

Radhi, Muhammad Azizul (2012) Physical and mechanical properties of oil palm lumber / Muhammad Azizul Radhi. [Student Project] (Unpublished)

Ramly, Nur Balqis Ashraf (2012) Properties of wood plastic composite from azadirachta excels / Nur Balqis Ashraf Ramly. [Student Project] (Unpublished)

Rashid, Mohamad Roshafizi and Zakaria, Mohd Aiman and Che Abd Manan, Ahmad Aiman (2012) Development of bookshelf one Malaysia concept. [Student Project] (Unpublished)

Razak, Athirah and Idrus, Hanis Afiqah and Mohd Noor, Nurul Fahana and Mohd Noor, Siti Nor Fatihah (2012) Chemical composition of Kelempayan (Neolamarckia Cadamba). [Student Project] (Unpublished)

Razali, Norhalimahtus Saadiah and Mohd Hazan, Noor Ain and Noh, Izzah Azimah (2012) Manufacturing of particle board from oil palm frond. [Student Project] (Unpublished)

Ripaai, Ahmad Husni and Kamaruddin, Mohamad Amirul and Abdul Karim, Muhammad Syarafi (2012) Properties of Kelempayan particleboard with different resin content (10%, 11% and 12%). [Student Project] (Unpublished)

S

Sa'at, Mohamad Sahzeri (2012) Properties of three layers hybrid particleboard from sawdust and acacia mangium / Mohamad Sahzeri Sa'at. [Student Project] (Unpublished)

Salim, Abdul Rasyid (2012) Machining properties of oil palm lumber / Abdul Rasyid Salim. [Student Project] (Unpublished)

Sukur, Mohd Shukrie Jr and Khairuddin, Muhammad Eliya and Abdul Aziz, Nabila Syafira and Mohd Ghazali, Nur Syamimi (2012) Bending strength properties of finger jointed Kelempayan wood (Neolamarckia Cadamba). [Student Project] (Unpublished)

U

Umar, Mohd Hanafi (2012) Withdrawal strength and physical properties of three layers hybrid particleboard / Mohd Hanafi Umar. [Student Project] (Unpublished)

W

Wan Mohd Nor, Wan Mohd Norsafizu (2012) Properties of wood plastic composites made from rubberwood sawdust / Wan Mohd Norsafizu Wan Mohd Nor. [Student Project] (Unpublished)

Z

Zakaria, Muhammad Khalaf and Mohamod, Muhammad Imran and Razali, Muhamad Zulhilmi and Engku Fakri, Engku Syahmi Arif and Husin, Syuwari (2012) Ash and lignin content of two Malaysian bamboo species. [Student Project] (Unpublished)

Zulrofli, Siti Shariha and Mohd Redzwan, Zulaikha and Abdul Karim, Khairulanwar and Kahar, Sadam (2012) Tree species composition of 0.1 ha plot at UiTM Jengka education forest (line 14). [Student Project] (Unpublished)