Items where Division is "Faculty of Mechanical Engineering" and Year is 2013

Stress analysis of radial and non- radial nozzle connections in ellipsoidal head pressure vessel / Haszeme Abu Kasim and Professor Dr. Ir. (2013) Journal of Mechanical Engineering (JMechE), 10 (1). pp. 67-83. ISSN 1823-5514 ; 2550-164X

Characterization of nanostructured zinc oxide thin films for ammonia gas sensor / Samsiah Ahmad. (2013) Masters thesis, thesis, Universiti Teknologi MARA.

Facility condition assessment in Malaysian multi-unit residential building using audit technique / Aizat Hilmi Zamzam. (2013) Masters thesis, thesis, Universiti Teknologi MARA.

Environmental testing standard in Malaysian automotive industry: a case study of the vehicle component electrical door control module / Nurul Hayati Abdul Wahid. (2013) Masters thesis, thesis, Universiti Teknologi MARA.

Prediction of distortion on multipass GMAW process using fem and experimental validation / Robert Ngendang Anak Lidam. (2013) Masters thesis, thesis, Universiti Teknologi MARA.

Initial response analysis of Robot-Based Intervention Program (RBIP) for children with autism using humanoid robot NAO / Luthffi Idzhar Ismail. (2013) Masters thesis, thesis, Universiti Teknologi MARA.

Experimental investigation on aluminium composite surface machined by electrical discharge machining process using response surface methodology / R. Rajesh and M. Dev Anand. (2013) Journal of Mechanical Engineering (JMechE), 10 (1). pp. 1-15. ISSN 1823-5514 ; 2550-164X

Experimental study and regression modeling of tool wear in CNC turning operation using soybean based cutting fluid / Posinasetti Nageswara Rao, Julie Zhang and Marry Eckman. (2013) Journal of Mechanical Engineering (JMechE), 10 (1). pp. 85-102. ISSN 1823-5514 ; 2550-164X

Low cost redesign of coil assemblies for ergonomic improvements / Loo Huck-Soo, Paul H.P. Yeow and Vimala Balakrishnan. (2013) Journal of Mechanical Engineering (JMechE), 10 (1). pp. 35-47. ISSN 1823-5514 ; 2550-164X

The effect of DIC parameters in the measurement of stress intensity factors Kı and Kıı / Lenny Iryani … [et al.]. (2013) Journal of Mechanical Engineering (JMechE), 10 (1). pp. 17-33. ISSN 1823-5514 ; 2550-164X

Prediction of cutting forces developed during hard turning of hard chrome plated surfaces on EN24 substrate / K. N. Mohandas, C. S. Ramesh and Eshwara Prasad Koorapati. (2013) Journal of Mechanical Engineering (JMechE), 10 (1). pp. 49-65. ISSN 1823-5514 ; 2550-164X

Investigation on phases transformation and mechanical properties of ductile iron by new heat treatment process / Mohd Faizul Idham Mohd Zulkipli. (2013) Masters thesis, thesis, Universiti Teknologi MARA.

Experimental cooling mode variation of an air-cooled PEM fuel cell using second-order thermal analysis / Wan Ahmad Najmi Wan Mohamed and Rahim Atan. (2013) Journal of Mechanical Engineering (JMechE), 10 (2). pp. 53-74. ISSN 1823-5514 ; 2550-164X

Stability augmentation for longitudinal modes of a small blended wing-body aircraft with canard as control surface / Rizal Effendy Mohd Nasir and Wahyu Kuntjoro. (2013) Journal of Mechanical Engineering (JMechE), 10 (2). pp. 37-51. ISSN 1823-5514 ; 2550-164X

Ballistic resistance analysis of non-filled tank against fragment simulating projectile (FSP) / Mohd Rozaiman Aziz … [et al.]. (2013) Journal of Mechanical Engineering (JMechE), 10 (2). pp. 75-91. ISSN 1823-5514 ; 2550-164X

Material characterization and axial crushing tests of single and double-walled columns at intermediate strain rates / Leonardo Gunawan … [et al.]. (2013) Journal of Mechanical Engineering (JMechE), 10 (2). pp. 19-36. ISSN 1823-5514 ; 2550-164X

Simulation of flow around a flapping wing using two-dimensional vortex method / Akhmad Farid Widodo, Lavi Rizki Zuhal and Hari Muhammad. (2013) Journal of Mechanical Engineering (JMechE), 10 (2). pp. 1-18. ISSN 1823-5514 ; 2550-164X

Longitudinal flight dynamics and stability of blended wing-body unmanned aerial vehicle with canard as control surface / Rizal Effendy Mohd Nasir. (2013) PhD thesis, thesis, Universiti Teknologi MARA.

Non-contact approach of roundness inspection for machined parts / Azmi Mohamed. (2013) PhD thesis, thesis, Universiti Teknologi MARA.

Synthesis and characterization of electrodeposited cobaltiron nanoparticles on different substrates / Wan Normimi Roslini Abdullah. (2013) Masters thesis, thesis, Universiti Teknologi MARA.

Effective content management and delivery methods using open access strategy / Mohd Zahid Ismail. (2013) PhD thesis, thesis, Universiti Teknologi MARA.