Items where Division is "Faculty of Mechanical Engineering" and Year is 2020

Ab Salim, Sulfadli (2020) A study of heat gain in reducing cooling load for library building in UiTM Permatang Pauh / Sulfadli Ab Salim. (2020) [Student Project] (Unpublished)

Abd Halim, Nurul Atikah (2020) Study of metal detection system performance using inductive proximity sensor / Nurul Atikah Abd Halim. (2020) [Student Project]

Abdul Mutalib, Syadiyatul Qistina (2020) Development of clean-up tagging system for children / Syadiyatul Qistina Abdul Mutalib. (2020) [Student Project] (Unpublished)

Abdul Rahim, Mohd Ikmal Hisham (2020) Effect of layer thickness on repeatability of 3D printed PLA produced using 3D Espresso F220 / Mohd Ikmal Hisham Abdul Rahim. (2020) [Student Project] (Unpublished)

Ahmad Daud, Muhamad Asyraf (2020) CAD feature recognition by feature based method / Muhamad Asyraf Ahmad Daud. (2020) [Student Project] (Unpublished)

Ahmad Zaidi, Ahmad Izhharuddin (2020) Biodegradability study of PLA / Syzygium Aromaticum composite in buried soil and open environment / Ahmad Izhharuddin Ahmad Zaidi. (2020) [Student Project] (Unpublished)

Azwan Affendi Nual, Zaim Ariefin (2020) Induced drag analysis of multi-winglets for aerodynamic performance on NACA 23015 / Zaim Ariefin Azwan Affendi Nual. (2020) [Student Project] (Unpublished)

Badrulsham, Muhammad Ikmal Hakim (2020) Development of graphical user interface for milling machine energy prediction tool / Muhammad Ikmal Hakim Badrulsham. (2020) [Student Project]

Bahmad Zaidi, Ahmad Izhharuddin (2020) Biodegradability study of PLA/syzygium aromaticum composite in buried soil and open environment / Ahmad Izhharuddin Bahmad Zaidi. (2020) [Student Project] (Unpublished)

Halimirizal, Mohammad Iskandar Harith (2020) Development of combination cooling method for solar-powered device / Mohammad Iskandar Harith Halimirizal. (2020) [Student Project] (Unpublished)

Hashim, Adam Harith (2020) Study on efficiency of process layout in the production of ethanol fuel / Adam Harith Hashim. (2020) [Student Project] (Unpublished)

Hussein, Muhammad ‘Afif (2020) Flip flop water fountain / Muhammad ‘Afif Hussein. (2020) [Student Project]

Ishak, Adam (2020) Numerical modelling on the effect of number of curvature to the velocity profile in asymmetric curve channel / Adam Ishak. (2020) [Student Project]

Jamaludin, Kamilia (2020) Development of experimental setup and procedure for axial impact test of Fiber Metal Laminate (FML) plate / Kamilia Jamaludin. (2020) [Student Project] (Unpublished)

Johari, Amir Harith (2020) The construction of salinity gradient solar pond for heat storage / Amir Harith Johari. (2020) [Student Project] (Unpublished)

Khairul Salleh, Nurul Nabilah (2020) Analysis on fuel properties of cerium oxide additive in algae biodiesel by using optimization tools / Nurul Nabilah Khairul Salleh. (2020) [Student Project]

Manggan, Ngadang (2020) Effect of recycling process to the physical and mechanical properties of polypropylene / Ngadang Manggan. (2020) [Student Project] (Unpublished)

Mazlan, Normann Syukran (2020) The design of heat extraction system for salinity gradient of solar pond / Normann Syukran Mazlan. (2020) [Student Project]

Md Jasni, Farhan (2020) Machining optimization using Firefly Algorithm / Farhan Md Jasni. (2020) [Student Project] (Unpublished)

Md Pauzi, Nurfatehah (2020) Development of 3-Dimensional holographic projection for lecture purpose / Nurfatehah Md Pauzi. (2020) [Student Project]

Mohamed Saberi, Nur Sabira (2020) Optimization and experimental investigations of fuel properties with algae biodiesel using design expert software / Nur Sabira Mohamed Saberi. (2020) [Student Project]

Mohd Halid, Saiful Amirul Asyraf (2020) Balancing two wheeled using Arduino microcontroller / Saiful Amirul Asyraf Mohd Halid. (2020) [Student Project]

Mohd Yosli, Nawwar Khalisa (2020) Biodegradability study of PLA / Pandanus Amaryllifolius composite in buried soil and open-air environment / Nawwar Khalisa Mohd Yosli. (2020) [Student Project] (Unpublished)

Mohd Zahari, Muhammad Syazrul (2020) Investigation on PETG tensile properties through 3D printing / Muhammad Syazrul Mohd Zahari. (2020) [Student Project] (Unpublished)

Mustafa, Ahmad Akmal (2020) Design and analysis of mini extrusion machine for 3D printing filament / Ahmad Akmal Mustafa. (2020) [Student Project] (Unpublished)

Ngahadi, Nur Annisa (2020) Roughness prediction of fused deposition modelling / Nur Annisa Ngahadi. (2020) [Student Project]

Nor Asffan, Muhammad Qayyum (2020) Graphical user interface for surface roughness prediction of CNC milling machine / Muhammad Qayyum Nor Asffan. (2020) [Student Project]

Rashid, Azrul Fadhli (2020) Biodegradability study of PLA/egg shell composite in buried soil and open environment / Azrul Fadhli Rashid. (2020) [Student Project] (Unpublished)

Razae, Muhamad Syaimanfathi (2020) Post processor modification and machine simulation in 5-axis machining using Fusion 360 CAM / Muhamad Syaimanfathi Razae. (2020) [Student Project] (Unpublished)

Roslan, Ahmad Afiq Aiman (2020) Dimensional accuracy of abs 3D printed part using 3D Espresso F220 machine / Ahmad Afiq Aiman Roslan. (2020) [Student Project]

Sudin, Mohd Yussof (2020) Numerical modelling on the effects of flow rates to the velocity profiles in serpentine microfluidic structure / Mohd Yussof Sudin. (2020) [Student Project] (Unpublished)

Zulkifli, Siti Salwa (2020) Feasibility study on solar power strength and distribution in Universiti Teknologi MARA (UiTM) Pulau Pinang / Siti Salwa Zulkifli. (2020) [Student Project] (Unpublished)