Module integrated MPPT converter for photovoltaic / Muhammad Nur Al Hafiz Mohamad Husaini

Mohamad Husaini, Muhammad Nur Al Hafiz (2020) Module integrated MPPT converter for photovoltaic / Muhammad Nur Al Hafiz Mohamad Husaini. [Student Project] (Unpublished)

Abstract

This project is aim to study of PV by observing performance power output current and voltage with and without MPPT. To apply perturb and observe algorithm of MPPT using MATLAB/Simulink. Develop the module integrated MPPT. To implement module integrated perturb and observe MPPT algorithm into photovoltaic system to solve PV mismatch losses application. MPPT is an algorithm to help converter extract MPP where the maximum power output of PV in given irradiance and temperature is located. This project will utilize MATLAB/Simulink to PV power system to monitor the PV V-I curve and PV P-V curve regarding irradiance and temperature. This project simulate perturb and observe maximum power point tracking algorithm by MATLAB/Simulink mathematical block. This project use boost converter because efficient. This project study the 2 MPPT converter architecture namely centralize MPPT and modulated integrated MPPT using MATLAB/Simulink. This project study the effect of MPPT algorithm. MPPT results output is MPP voltage. MPPT are implement into microcontroller to help converter extracting power at MPP proven help reduce mismatch losses as PV power extraction is varied as power extract depend on temperature and irradiance of sunlight. The irradiance determine the output voltage and the temperature determine the output current To run PV with MPPT converter, the system must be develop with one system attach to solver configuration and another as intended system Module integrate is more reliable as the system less susceptible to over voltage and short circuit if same PV rating utilise in the system. PV system with module integrated MPPT give higher power output than PV system with centralize MPPT converter. Module integrated MPPT can experience short circuit if the first PV give higher voltage than the second. MATLAB/Simulink cannot run Simulink base component to simulate 2 PV with different specification as error occur in the solver configuration.

Metadata

Item Type: Student Project
Creators:
Creators
Email / ID Num.
Mohamad Husaini, Muhammad Nur Al Hafiz
2017668628
Contributors:
Contribution
Name
Email / ID Num.
Thesis advisor
Mohd Hussain, Mohd Najib
UNSPECIFIED
Subjects: T Technology > TK Electrical engineering. Electronics. Nuclear engineering > Photovoltaic power systems
T Technology > TK Electrical engineering. Electronics. Nuclear engineering > Electronics
T Technology > TK Electrical engineering. Electronics. Nuclear engineering > Electronics > Apparatus and materials
T Technology > TK Electrical engineering. Electronics. Nuclear engineering > Electronics > Photoelectronic devices (General)
Divisions: Universiti Teknologi MARA, Pulau Pinang > Permatang Pauh Campus > Faculty of Electrical Engineering
Programme: Bachelor of Engineering (Hons) Electrical And Electronic Engineering
Keywords: MATLAB/Simulink, Microcontroller, Centralize MPPT Converter
Date: July 2020
URI: https://ir.uitm.edu.my/id/eprint/44341
Edit Item
Edit Item

Download

[thumbnail of 44341.pdf] Text
44341.pdf

Download (56kB)

Digital Copy

Digital (fulltext) is available at:

Physical Copy

Physical status and holdings:
Item Status:

ID Number

44341

Indexing

Statistic

Statistic details