Reinforced concrete building design project: project based learning (case study) / Muhammad Aqil Luqman Mohd Hafez

From the project design works that have been conducted for this double storey house, I able to draw the structural key plan of ground floor, first floor and roof floor from the architectural drawing. Next, the project schedule were listed all the project activities and the time frame of the project. Next, the soil report which is SI report that have been got from other company, I able to know and calculate the soil bearing to connect with the calculation of design pad footing. Furthermore, I can know how design the main structure using manual calculation. For manual calculation, it must use the steps given such as first need to assume the suitable size for the main structure, then, calculate the main reinforcement, shear reinforcement, deflection and cracking. Other than that, I know how to use Prokon based on the manual design calculation by transfer the initial data to the software. Furthermore, I know how to rate the material after calculate the weight of material used in every main structure in taking off sheet by using some online references. From the other side, I have experienced fail in design the main structure at the deflection but it is easy to overcome by switching the suitable size of diameter bar or link spacing. Finally for the upcoming years, I able to use all the knowledge of design works adapt with the real project construction. It teach a lot or built more knowledge to determine the problem and handle it professionally in design works. Once the design fail at deflection or cracking it not effect other work, I able to know how to change the material such as suitable diameter or link and spacing until it not fail.