Items where Subject is "Powder metallurgy"

A

Abbas, Muhammad Fatah @ Fadullah (2005) Characterization of optimal powder loading for metal injection moulding (MTM) / Muhammad Fatah @ Fadullah Abbas. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Abdul Rahman Bakar, Razali (1996) Kajian mengenai proses "powder metallurgy" / Razali Abdul Rahman Bakar. (1996) [Student Project] (Unpublished)

Abdul Rahman Bakar, Razali and Abang Ibrahim, Dayang Norhayati (1996) Power metallurgy / Razali Abdul Rahman Bakar and Dayang Norhayati Abang Ibrahim. (1996) [Student Project] (Unpublished)

Ahmad, Mohd Faizal and Anuar, Mohd Sufian (2002) Upper bearing blank / Mohd Faizal Ahmad and Mohd Sufian Anuar. (2002) [Student Project] (Unpublished)

Azrin, Anis Safia and Shamsuddin, Saidatulakmar (2024) The effect of sintering duration on metal matrix composite reinforced with CNT fabricated by powder metallurgy: a review / Anis Safia Azrin and Saidatulakmar Shamsuddin. (2024) Scientific Research Journal, 21 (2): 1. pp. 1-21. ISSN 1675-7009

B

Budin, Salina and Zaharudin, Aznifa Mahyam (2008) A study on impact energy required in Mechanical Alloying (MA) / Salina Budin and Aznifa Mahyam Zaharudin. (2008) [Research Reports] (Unpublished)

G

Gennadiy, Akimov and Ihor, Andreev and Tamara, Kosenchuk and Vitalii, Sheremet and Iryna, Trosnikova and Petro, Loboda (2024) Effect of cold isostatic pressing and VC grain growth inhibitor addition on WC grain size and mechanical properties of WC-8Co cemented carbide / Gennadiy Akimov ... [et al.]. (2024) Journal of Mechanical Engineering (JMechE), 21 (2): 2. pp. 23-35. ISSN 1823-5514 ; 2550-164X

J

Jamaludin, Shamsul Baharin and Hussain, Zuhailawati and Ahmad, Zainal Arifin (2014) Enhancing properties of fe-cr-alumina composites prepared by powder metallurgy / Saidatulakmar Shamsuddin ... [et al.]. (2014) Jurnal Intelek, 8 (2). pp. 20-26. ISSN 2231-7716

M

Mohamed Noor, Rizal and Karim, Khairul Fauzi and Mohamed, Kamrol Amri (2006) Strenthening of alumunium with addition of nano-silicon carbide by using powder metallurgy method / Rizal Mohamed Noor, Khairul Fauzi Karim and Kamrol Amri Mohamed. (2006) [Research Reports] (Unpublished)

Mohamed Noor, Rizal and Karim, Khairul Fauzi and Zainuddin, Aznifa Mahyam (2007) The effect of the nano silicon carbide on mechanical properties of aluminium / Rizal Mohamed Noor, Khairul Fauzi Karim and Aznifa Mahyam Zainuddin. (2007) ESTEEM Academic Journal, 3. pp. 15-24. ISSN 1675-7939

Mohd Yusof, Mohd Khuzairy (2004) Sintering study in metal injection molding (MIM) process / Mohd Khuzairy Mohd Yusof. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Muhammad Mukhtar, Muhammad Haikal (2017) Sintering temperature optimization of ultra-fine Tungsten Carbide Cobalt (WC-CO) tool insert with addition of Carbon (C) and Vanadium Carbide (VC) \ Muhammad Haikal Muhammad Mukhtar. (2017) [Student Project] (Unpublished)

S

Shamsuddin, Saidatulakmar and Jamaludin, Shamsul Baharin and Hussain, Zuhailawati and Ahmad, Zainal Arifin (2014) Enhancing properties of Fe-Cr-alumina composites prepared by powder metallurgy / Saidatulakmar Shamsuddin... [et al.]. (2014) Jurnal Intelek, 8 (2). pp. 20-26. ISSN 2682-9223

Sulaiman, Mohd Azizul (2016) Investigation on the effect of heat treatment process on corrosion enhancement of Co-Ni-Fe coated mild steel \ Mohd Azizul Sulaiman. (2016) [Student Project] (Unpublished)

W

Wahab, Nor ‘Aini and Omar, Mohd Afian and Ahmad, Ismail Nasiruddin and Nordin, Nor Amalina and Amir, Amalina (2014) Novel formulation of waste rubber binder in producing net shaped and precise M2 HSS components / Nor'aini Wahab ... [et al.]. (2014) [Research Reports] (Submitted)

Y

Yahya, Iziana and Abd Hamid, Hamidi and Mayappan, Ramani (2012) The Sn-3.5Ag-1.0Cu-0.1Zn/Cu intermetallic interface under thermal aging / Iziana Yahya, Hamidi Abd Hamid and Ramani Mayappan. (2012) Jurnal Intelek, 7 (2). pp. 9-15. ISSN 2682-9223