Items where Subject is "Surface effects and tests"

Article

Djamai, Andel and Zaidi, Hamid and Bekhouche, Djamel and Bouchoucha, Ali (2024) Numerical analysis of 3D unilateral quasi-static contact: effect of coating thickness and mechanical properties / Andel Djamai ... [et al.]. (2024) Journal of Mechanical Engineering (JMechE), 21 (3): 1. pp. 1-28. ISSN 1823-5514 ; 2550-164X

Jagannath, K. (2010) Effect of roughness on journal bearing performance with non-newtonian fluids / K. Jagannath. (2010) Journal of Mechanical Engineering (JMechE), 7 (1). pp. 1-13. ISSN 1823-5514 ; 2550-164X

Keiichi, Ninomiya and Sho, Yano and Shun, Yoshida and Mizuho, Nakamura and Akira, Kakimoto (2025) Evaluation of sliding surfaces using three-dimensional surface texture parameters / Keiichi Ninomiya ... [et al.]. (2025) Journal of Mechanical Engineering (JMechE), 22 (2): 6. pp. 71-82. ISSN e-ISSN: 2550-164X

Thesis

Ab Aziz, Mohd Farhan (2017) Studies of biodegradable properties of starch based film as polybag for agricultural application / Mohd Farhan Ab Aziz. (2017) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Abd Malek, Nor Jihan (2022) European Yield Model (EYM) for double shear splice connection made of TST and STS bolted Mengkulang glulam / Nor Jihan Abd Malek. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Abd Rahman, Nurul Huda (2019) As-built inspection for concrete tank using non-contact three dimensional data acquisition / Nurul Huda Abd Rahman. (2019) Degree thesis, thesis, Universiti Teknologi Mara Perlis.

Abdul Hamid, Noor Sa’adah (2022) Surfactant-modified pineapple leaf fibre for removal of reactive orange 16 and used engine oil / Noor Sa’adah Abdul Hamid. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Busari, Yusuf Olanrewaju (2022) A framework of coupled fem simulation for fatigue crack assessment of welded high strength low alloy S460G2+M steel based on linear elastic fracture mechanics / Yusuf Olanrewaju Busari. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Jusoh, Nur Auni Izzati (2022) Quantifying and predicting the tensile properties of Moringa Oleifera Bark-silicone biocomposite / Nur Auni Izzati Jusoh. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Muhamad Jamal, Ahmad Zaril (2003) Protection against corrosion of concrete reinforcement in marine environment - case study Westport, Klang / Ahmad Zaril Muhamad Jamal. (2003) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Muhammad Badrollddin, Aina Sharina (2024) Unsteady shear-stress-driven rivulets flow of Newtonian and non-Newtonian power-law fluids with strong surface-tension effect / Aina Sharina Muhammad Badrollddin. (2024) Degree thesis, thesis, Universiti Teknologi MARA, Terengganu.

Saidin, Siti Shahirah (2022) Serviceability predictive model of ultra-high performance concrete bridge using vibration assessment / Siti Shahirah Saidin. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Selamat, Muhamad Firdaus (2009) Influence of prosthesis stem tapers in cementless hip arthrosplasty / Muhamad Firdaus Selamat. (2009) Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.

Shaipudin, Nurul Ashikin (2023) Unsteady gravity-driven rivulet flow of non-Newtonian power-law fluids with strong surface-tension effect / Nurul Ashikin Shaipudin. (2023) Degree thesis, thesis, Universiti Teknologi MARA, Terengganu.

Yahya, Nor Hayati (2002) Corrosion protection / Nor Hayati Yahya. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Zaharudin, Aznifa Mahyam (2017) Optimization and tribological properties of semi metallic friction materials / Aznifa Mahyam Zaharudin. (2017) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Zainal, Siti Umrah (2022) S-phase layer by hybrid low temperature thermochemical treatment process on 316 LVM stainless steel: corrosion and biocompatibility test / Siti Umrah Zainal. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Zulkefle, Muhammad Alhadi (2017) Spin coated TiO2-based egfet ph sensor: fabrication of sensing membrane and sensor characterization / Muhammad Alhadi Zulkefle. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Student Project

Abdul Aziz, Mohd Iswandi and Wan Alwi, Wan Azman (2001) The environmental effect on tensile strength and modulus of elasticity of PP/cloth composite / Mohd Iswandi Abdul Aziz and Wan Azman Wan Alwi. (2001) [Student Project] (Unpublished)

Abu Hassan, Hashim (1991) Study of fatigue crack propagation (FCP) of polymethylmethacrylate (PMMA) at a different R ratio / Hashim Abu Hassan. (1991) [Student Project] (Unpublished)

Ali, Zex and Kamsin, Nor Mala (2002) Rubber tube as an elastic spring in soap dispenser mechanism / Zex Ali and Nor Mala Kamsin. (2002) [Student Project] (Unpublished)

Awang Sallam, Awang Kamarruddin (1998) Study on cavitation erosion of ship propeller and selection of a few components for cavitation erosion test rig / Awang Kamarruddin Awang Sallam. (1998) [Student Project] (Unpublished)

Bosuin, Scott Simon (2005) A study on compressive strength of concrete with glass aggregate / Scott Simon Bosuin. (2005) [Student Project] (Unpublished)

Che Lah, Ayurahani (2006) Study on laminated composite material using numerical approach / Ayurahani Che Lah. (2006) [Student Project] (Unpublished)

Daud, Mohd Zul-Azri (2002) Design of test fixture for high cycle fatigue test of fiber-reinforced composite laminates / Mohd Zul-Azri Daud. (2002) [Student Project] (Unpublished)

Dolian, Evllynn Suezelynn (2019) Ceiba Pentandra seed based activated carbon for synthetic wastewater (Copper, Cu (ii)) treatment / Evllynn Suezelynn Dolian. (2019) [Student Project] (Unpublished)

Jamaludin, Muhammad Nasri (2016) Optimization of copper based powder metallurgy brake friction materials / Muhammad Nasri Jamaludin. (2016) [Student Project] (Unpublished)

Mohamad, Mustafa (1998) Fracture mechanics and its application to wood / Mustafa Mohamad. (1998) [Student Project] (Unpublished)

Mohd Ghazali, Haziq Shazwan (2022) Study of hardness on the mild steel in various cooling medium / Haziq Shazwan Mohd Ghazali. (2022) [Student Project] (Submitted)

Mohd Jaya, Alif Akhmizan (2019) Crushed coconut shells as an additive for stabilization treatment of subgrade materials / Alif Akhmizan Mohd Jaya. (2019) [Student Project] (Unpublished)

Mohd Sabri, Muhammad Adib (2017) Wear and adhesive performance investigation on Co-Ni-Fe coated mild steel / Muhammad Adib Mohd Sabri. (2017) [Student Project] (Unpublished)

Mohd Utama, Izzul Faiz Farhan (2022) Structural design and analysis amphibious boat / Izzul Faiz Farhan Mohd Utama. (2022) [Student Project] (Submitted)

Mohd. Anuar, Nor Asmalisa and Mat Yusof, Yusnita (2000) Ujikaji momen lentur dan daya ricih bagi beban teragih seragam / Nor Asmalisa Mohd. Anuar and Yusnita Mat Yusof. (2000) [Student Project] (Unpublished)

Mokhtar, Mohd Idham (2006) A laboratory study on laterite soil as granular replacement material in embankment works / Mohd Idham Mokhtar. (2006) [Student Project] (Unpublished)

Osman, Saat and Osman, Hamirun (2002) Ultrasonic detection of contact point corrosion / Saat Osman and Hamirun Osman. (2002) [Student Project] (Unpublished)

Rojitan, Batrisyia (2023) Metallographic observation: annealing and quenching on aluminum and mild steel / Batrisyia Rojitan. (2023) [Student Project] (Unpublished)

Shaari, Abdullah and Md Isa, Mahdzir (1986) Flexural strength behaviour of prestressed beam different initial prestress force / Abdullah Shaari and Mahdzir Md Isa. (1986) [Student Project] (Unpublished)

Zakaria, Nurshuhada (2022) Mechanical and physical properties of brass vs aluminium / Nurshuhada Zakaria. (2022) [Student Project] (Submitted)

Research Reports

Ismail, Mohd Fauzi and Hamat, Muniroh and Mohamed Nor, Rizal (2007) Effect of surface texture towards product performance / Mohd Fauzi Ismail, Muniroh Hamat and Rizal Mohamed Nor. (2007) [Research Reports] (Unpublished)

Lim, Teong Yeong and Lim, Juinn Hsuh and Othman, Muhamad (2008) A design of machine vision system for the automatic surface profiling measurement using shadow moire technique / Lim Teong Yeong, Lim Juinn Hsuh and Muhamad Othman. (2008) [Research Reports] (Unpublished)