Items where Subject is "Electronic data processing. Computer-aided engineering"
- Library of Congress Subject Areas (1)
- T Technology (1)
- TA Engineering. Civil engineering (1)
- Engineering mathematics. Engineering analysis (2)
- Electronic data processing. Computer-aided engineering (48)
- Engineering mathematics. Engineering analysis (2)
- TA Engineering. Civil engineering (1)
- T Technology (1)
A
Abd Rahman, Nurul Huda (2019) As-built inspection for concrete tank using non-contact three dimensional data acquisition / Nurul Huda Abd Rahman. (2019) Degree thesis, thesis, Universiti Teknologi Mara Perlis.
Abdullah, Rahani
(1997)
Computer aided design and characterisation of microstrip low-pass filter/ Rahani Abdullah.
(1997)
[Student Project]
(Unpublished)
Ag. Mohamad, Norhayati
(2005)
Improvement of reinforced concrete design based on BS8110:1997 using computer aided software / Norhayati Ag. Mohamad.
(2005)
[Student Project]
(Unpublished)
Ahmad, Rafidah
(1999)
On the design of microstrip bandpass filters/ Rafidah Ahmad.
(1999)
Degree thesis, thesis, Universiti Teknologi MARA (UiTM).
Ahmad, Reidzuan
(1997)
Asynchronous transfer mode (ATM) real-time applications / Reidzuan Ahmad.
(1997)
Degree thesis, thesis, Universiti Teknologi MARA (UiTM).
Albakri, Mohd Al-Afiq
(2009)
Satellite link budget analysis using MATLAB / Mohd Al-Afiq Albakri.
(2009)
Degree thesis, thesis, Universiti Teknologi MARA (UiTM).
Amran, Ain Uzzairah (2018) The capability of [multi-rotor DJI phantom 3] advanced for detecting crack on concrete wall different distance / Ain Uzzairah Amran. (2018) Degree thesis, thesis, Universiti Teknologi Mara Perlis.
Amran, Muhammad Badrul Amin
(2022)
Cost benefit analysis of lighting retrofit of led bulb at Bangunan Ilmuan UiTM Campus Bukit Besi / Muhammad Badrul Amin Amran.
(2022)
[Student Project]
(Unpublished)
Arsad, Dinie Zulhusni
(2022)
Structural analysis of an outdoor drying rack / Dinie Zulhusni Arsad.
(2022)
[Student Project]
(Submitted)
Azahari, Ainul Najwa and Mohd Sabri, Norlina (2024) Flood damage cost prediction using random forest / Ainul Najwa Azahari and Norlina Mohd Sabri. (2024) ESTEEM Academic Journal, 20 (March). pp. 12-23. ISSN 2289-4934
Azhar, Ahmad Alif Qayyum
(2022)
Vibration reduction of mechanical structure using tuned mass damper / Ahmad Alif Qayyum Azhar.
(2022)
[Student Project]
(Submitted)
Aziz, Muhammad Aidil Adha (2014) Short load forecasting by using a hybrid model of adaptive Neuro-Fuzzy system for electric load: article / Muhammad Aidil Adha Aziz. (2014) pp. 1-9.
Aziz, Muhammad Aidil Adha
(2014)
Short load forecasting by using a hybrid model of adaptive neuro-fuzzy system for electric load / Muhammad Aidil Adha Aziz.
(2014)
Degree thesis, thesis, Universiti Teknologi MARA (UiTM).
Azuardi, Refnaldy (2005) A fuzzy MADM (Multiple Attribute Decision Making) expert system for job matching / Refnaldy Azuardi. (2005) Degree thesis, thesis, Universiti Teknologi MARA.
B
Belinda Chong, Chiew Meng and Md Fauzi, Normasni and Isa, Iza Sazanita
(2010)
Modelling of a level drum process control training system / Belinda Chong Chiew Meng, Normasni Md Fauzi and Iza Sazanita Isa.
(2010)
[Research Reports]
(Unpublished)
C
Che Haron, Mohammad Bakri
(2013)
Developing framework for natphoric computer-aided web-based kansei engineering / Mohammad Bakri Che Haron.
(2013)
Masters thesis, thesis, Universiti Teknologi MARA.
Chuhin, Lina
(2007)
Rainfall runoff modelling by using HEC-HMS / Lina Chuhin.
(2007)
[Student Project]
(Unpublished)
E
Ezani, Nur Iman
(2022)
Design and fabrication of portable cloth rack / Nur Iman Ezani.
(2022)
[Student Project]
(Submitted)
H
Harun Anuar, Muhammad Fikri
(2022)
Study of hardness on the stainless steel in various cooling medium / Muhammad Fikri Harun Anuar.
(2022)
[Student Project]
(Unpublished)
J
Jaafar, Mohd Zukri
(1993)
Integrated computer package for productivity, cost control and schedule control / Mohd Zukri Jaafar.
(1993)
[Student Project]
(Unpublished)
Jaffar @ Mustapha, Roshimee
(1996)
Liquid/water level control of a single-tank system (hardware development) / Roshimee Jaffar @ Mustapha.
(1996)
Degree thesis, thesis, Institut Teknologi MARA (ITM).
Ja’afar, Mohd Zalimi (2000) The effect of the lattice girder on the composite action of the half slab / Mohd Zalimi Ja’afar. (2000) [Student Project] (Unpublished)
M
Mali, Mohamad
(2022)
Development of a novel failure prediction tool (CHyCLOP) using analytical method for hybrid composite laminates based on combined lamination and failure theories / Mohamad Mali.
(2022)
PhD thesis, thesis, Universiti Teknologi MARA (UiTM).
Marwan, Shahrul Hisyam
(2014)
Human skull 3D model development and biomechanical analysis in full frontal crash / Shahrul Hisyam Marwan.
(2014)
Masters thesis, thesis, Universiti Teknologi MARA.
Mat Nasir, Muhammad Naufal Asyraf
(2022)
Grip cup holder project / Muhammad Naufal Asyraf Mat Nasir.
(2022)
[Student Project]
(Unpublished)
Mohamed Dani, Muhammad Azmi
(1994)
Computer aided software for low power transformer application / Muhammad Azmi Mohamed Dani.
(1994)
Advanced Diploma thesis, thesis, MARA Institute of Technology (ITM).
Mohammed Taha, Mohd Adib
(2010)
CFD modelling of blood flow in portal vein hypertension with and without thrombosis for non-newtonian / Mohd Adib Mohammed Taha.
(2010)
Degree thesis, thesis, Universiti Teknologi MARA Shah Alam.
Mohd Aizam, Muhammad Afiq and Mohamad Hadis, Nor Shahanim and Abdullah, Samihah (2020) IoT-based smart wheelchair system for physically impaired person / Muhammad Afiq Mohd Aizam ... [et al.]. (2020) ESTEEM Academic Journal, 16 (June): 6. pp. 59-73. ISSN 2289-4934
Mohd Andrie, Nur Adriana Auni
(2022)
Generation of G-Code on aluminum blocks using vertical CNC machine / Nur Adriana Auni Mohd Andrie.
(2022)
[Student Project]
(Submitted)
Mohd Faisal, Muhammad Danial Hakim
(2022)
Effect of microstructure on stainless steel due to variable temperature using plasma cutting / Muhammad Danial Hakim Mohd Faisal.
(2022)
[Student Project]
(Unpublished)
Mohd Samsi, Hardiyana
(2007)
A numerical study on structural behaviour of bonded and unbonded prestressed beams / Hardiyana Mohd Samsi.
(2007)
[Student Project]
(Unpublished)
Mohd Shaiful Afzam, Muhammad Luqman Hakim
(2022)
A computational simulation of foreshore wave at rocky coast landform near Terengganu coastline during monsoon season / Muhammad Luqman Hakim Mohd Shaiful Afzam.
(2022)
[Student Project]
(Unpublished)
Mohd Utama, Izzul Faiz Farhan
(2022)
Structural design and analysis amphibious boat / Izzul Faiz Farhan Mohd Utama.
(2022)
[Student Project]
(Submitted)
Mohd Yusof, Mohd Hidzham
(2008)
PC based data logger / Mohd Hidzham Mohd Yusof.
(2008)
[Student Project]
(Unpublished)
N
Noor Azhari, Mohamad Noor Asnawi
(2022)
Hull design & stability analysis of GRP Bedar / Mohamad Noor Asnawi Noor Azhari.
(2022)
[Student Project]
(Unpublished)
O
Osman @ Mohd Nordin, Muhammad Zakiruddin
(2022)
Miniature drilling machine prototype / Muhammad Zakiruddin Osman @ Mohd Nordin.
(2022)
[Student Project]
(Submitted)
Othman, Ahmad Fairuz
(2010)
Evaluation of travel time and speed on mid-block urban street using computer simulation models / Ahmad Fairuz Othman.
(2010)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
Othman, Mohd Hayyul Dltizam
(2009)
Performance analysis of BPSK and QPSK using error correcting code through AWGN / Mohd Hayyul ltizam Othman.
(2009)
Degree thesis, thesis, Universiti Teknologi MARA (UiTM).
R
Ramli, Saliza
(2013)
Performance of handover procedure for enhanced relay LTE networks / Saliza Ramli.
(2013)
Masters thesis, thesis, Universiti Teknologi MARA (UiTM).
Rejab, Nuraini
(1992)
An expert system for float management / Nuraini Rejab.
(1992)
Advanced Diploma thesis, thesis, Universiti Teknologi MARA (UiTM).
Roslan, Nurul Iwani
(2007)
Assesment on X - bracing system and V - bracing system of steel building / Nurul Iwani Roslan.
(2007)
[Student Project]
(Unpublished)
S
Sahab, Mohamad Izam and Musa, Jamal Nahar
(2004)
CAD, CAE and CAM of solid disc brake, and the foundry process / Mohamad Izam Sahab and Jamal Nahar Musa.
(2004)
[Student Project]
(Unpublished)
Sahbudin @ Sahabudin, Hamizah and Mohd Yunus, Nurul Afiqah and Mohd Nasir, Syaza Aida
(2018)
Designing a front car by using Bezier Curves and Lagrange Interpolation in Computer-Aided Geometric Design (CAGD) / Hamizah Sahbudin @ Sahabudin, Nurul Afiqah Mohd Yunus and Syaza Aida Mohd Nasir.
(2018)
[Student Project]
(Unpublished)
Salleh, Mohd Akmal
(2007)
Development of computer aided design of rectangular reinforced concrete column by using Visual Basic 6.0 / Mohd Akmal Salleh.
(2007)
[Student Project]
(Unpublished)
Samat, Noorhaliza Hany
(2005)
Flood inundation mapping using HEC-RAS and ArcView GIS / Noorhaliza Hany Samat.
(2005)
[Student Project]
(Unpublished)
W
Wan Zaki, Wan Muhamad Fahmi
(2006)
Computer approach using MathCAD for better understanding to the Structural Analysis II (KJC 424) / Wan Muhamad Fahmi Wan Zaki.
(2006)
[Student Project]
(Unpublished)
Y
Yusof, Mohd. Tabie
(1990)
Software development reinforced concrete computer design accordance with BS 8110 / Mohd. Tabie Yusof.
(1990)
[Student Project]
(Unpublished)
Z
Zulhaimi, Muhammad Shamin (2018) Modeling of structural deformation of Staff’s Quarters Sekolah Menengah Kebangsaan Ranau subjected to the 2015 Ranau earthquake using Ruaumoko 2D / Muhammad Shamin Zulhaimi. (2018) [Student Project] (Unpublished)