Items where Division is "Universiti Teknologi MARA, Pahang > Jengka Campus > Faculty of Applied Sciences (C)" and Year is 2015

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | H | J | K | M | N | P | S | T | V | W | Y | Z
Number of items: 37.

A

Abd Aziz, Radhiah (2015) Adhesion of nc lacquer on 3 different sanded surfaces of Kelempayan timber / Radhiah Abd Aziz. Student Project. Faculty Of Applied Sciences, Jengka, Pahang. (Unpublished)

Ahmad Zaini, Mohamad Uzair Hazzard (2015) Nail withdrawal of three selected Malaysian timbers / Mohamad Uzair Hazzard Ahmad Zaini. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Ab Hamid, Atikah (2015) Finishing properties of shellac by using different viscosity and abrasive paper applied on sepetir (sindora spp.) / Atikah Ab Hamid. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Abd Halim, Nur Afiqah (2015) Properties of low density particleboard made from oil palm trunk (OPT) / Nur Afiqah Abd Halim. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Abdullah Sani, Nur Aini Adawiyah (2015) Bending strength of bonded three selected malaysian timber species (sepetir, kelat and sesendok) with polyvinyl acetate (pvac) / Nur Aini Adawiyah Abdullah Sani. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Amat Sa'aidi, Muhammad Zakwan (2015) Buffer capacity effect of meranti pa'ang (shorea bracteolata) and sesenduk (endospermum diadenum) on the reactivity of urea formaldehyde and phenol formaldehyde adhesive / Muhammad Zakwan Amat Sa'aidi. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

B

Bahrim, Ahmad Ariffuddin (2015) Properties of insulation board made from rice husk and waste paper / Ahmad Ariffuddin Bahrim. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

H

Hairuddin, Mohamad Dzulhelme (2015) Mechanical and physical properties of acacia mangium spp forwood cement board relation to particle size and cement ratio / Mohamad Dzulhelme Hairuddin. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Haris, Zainab (2015) Properties of oriented strand board (OSB) from acacia mangium and rubberwood / Zainab Haris. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

J

Jamal, Nur Syazwanie (2015) Physical and mechanical properties of bayas wood (oncospema horridum) / Nur Syazwanie Jamal. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Julie, Diana (2015) Physical and mechanical properties of three layered particleboard from Kelempayan (Neolamarckia Cadamba) and sawmill sawdust / Diana anak Julie. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

K

Khalil, Mohammad Zahin (2015) Properties of wood plastic composite by using hibiscus cannabinus spp. (kenaf) as a raw material / Mohammad Zahin Khalil. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

M

M. Omar, Siti Nadrah (2015) Properties of bio-composite products from acacia strand and coconut veneer / Siti Nadrah M. Omar. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Marzuki, Mazlinda (2015) Properties of particleboard made from rice husks and coconut husks in relation of varying resin content and board density / Mazlinda Marzuki. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Masir, Muhammad Nabil Irsyad (2015) Effect of alkaline percentages on wood plastic composites properties / Muhammad Nabil Irsyad Masir. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Mohamad Noor, Abdul Hakim Baihaqi (2015) Influence of oil palm trunk (elaeis guineensis) and acacia (acacia mangium) on the particleboard properties / Abdul Hakim Baihaqi Mohamad Noor. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Mohd Adzha, Nur Athirah (2015) Design of multipurpose table based on anthropometric data / Nur Athirah Mohd Adzha. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Mohd Azhar, Mohamad Alif Aizat (2015) Properties of acacia mangium wood cement board in relation to particle size and additives (na2si03) / Mohamad Alif Aizat Mohd Azhar. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Mohd Hamidi, Fathin Shahirah (2015) Finishing properties of two selected types of coating materials on sepetir wood / Fathin Shahirah Mohd Hamidi. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Mohd Hatta, Abdul Halim (2015) Effect of the resin content and density on the properties of three layer particleboard from kelempayan (neolamarckia cadamba) and wood shaving / Abdul Halim Mohd Hatta. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Mohd Nizam, Nursyuhada (2015) Anatomical properties of kelempayan (neolamarckia cadamba) / Nursyuhada Mohd Nizam. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

N

Noh, Izzah Azimah (2015) Standard blank for wood lamination on khaya ivorensis / Izzah Azimah Noh. Student Project. Faculty Of Applied Sciences, Jengka, Pahang. (Unpublished)

P

Philip, Jonity (2015) The performance of particleboard made from rice husk and coconut husk based on type density and type of raw material / Jonity Philip. Student Project. Faculty of Applied Sciences, Universiti Teknologi MARA, Pahang, Jengka, Pahang. (Unpublished)

S

Saffuan, Norsyazwani (2015) Fiber morphology and anatomical properties of mendong wood (elaeocarpus spp.) in Malaysia / Norsyazwani Saffuan. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Sajali, Nur Aisah (2015) Screw withdrawal properties of glue-laminated timber made from kelampayan and sesendok / Nur Aisah Sajali. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Sakiman, Mohammad Akhmal (2015) Properties of particleboard from oil palm trunk in relation to resin content and wax addition / Mohammad Akhmal Sakiman. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Saleh, Mohamad Syazwan (2015) ** PDF DAMAGE***Hybrid particleboard properties from acacia mangium and 'petal relalang' (leucaena leucocephala) using urea-formaldehyde resin / Mohamad Syazwan Saleh. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Seraila, Azlan (2015) Influence of particle sizes in homogenous and heterogeneous wood cement board properties made from acacia mangium / Azlan Seraila. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Supangat, Noor Shafiqah (2015) Finishing properties of lacquer by using different methods of application on sepetir / Noor Shafiqah Supangat. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Suratman, Nur Othman (2015) Properties of medium density fiberboard from rubberwood and leucaena in relation to wood ratio and resin content / Nur Othman Suratman. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

T

Tuan Ismail, Tuan Mohd Fakrul (2015) Effect of varying resin content and board densities on the properties of three layers particleboard from kelempayan. / Tuan Mohd Fakrul Tuan Ismail. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

V

Vanessa, Alexander (2015) Buffer capacity effects of delonix regia and hevea brasiliensis extractives on reactivity of selected adhesives / Alexander Vanessa. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

W

Wan Hassan, Wan Hazwani (2015) Properties of hybrid particleboard from acacia mangium and petal belalang using phenol formaldehyde resin / Wan Hazwani Wan Hassan. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Wan Omar, Wan Jamalludin (2015) Properties of hybrid particleboard from acacia (acacia mangium) and oil palm trunk (elaeis guineensis) / Wan Jamalludin Wan Omar. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Y

Yunus, Yuhanis (2015) Performance of finger joint from Sepetir / Yuhanis Yunus. Student Project. Faculty Of Applied Sciences, Jengka, Pahang. (Unpublished)

Z

Zahari, Mohd Haziq Zulfadhli (2015) Properties of hybrid board from rice husk and rubberwood fiber / Moho Haziq Zulfadhli Zahari. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Zawil Anuar, Muhammad Zahid Akmal (2015) Properties of nail withdrawal holdings on Kelempayan Timber (Neolamarckia Cadamba) / Muhammad Zahid Akmal Zawil Anuar. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

This list was generated on Sun Jan 26 07:05:07 2020 +08.