Effect of spindle speed and feed per tooth in feed rate perspective on inconel HX cutting force / N. A. Mohd Nor … [et al.]

Mohd Nor, N. A. and Kamarulzaman, N. F. and Zakaria, N. A. S. and Awang, N. and Baharudin, B. T. H. T. and Mohd Ariffin, M. K. A. and Leman, Z. (2021) Effect of spindle speed and feed per tooth in feed rate perspective on inconel HX cutting force / N. A. Mohd Nor … [et al.]. Journal of Mechanical Engineering (JMechE), 8 (2). pp. 65-76. ISSN (eISSN):2550-164X

Download

[thumbnail of 47677.pdf] Text
47677.pdf

Download (467kB)

Abstract

Reducing feed rate during end-milling of nickel-based superalloys for lowcutting force has always been a common approach. This is due to these alloys having superior properties, making them widely regarded as difficultto-machine materials. As feed rate is tied to spindle speed and feed per tooth, it is crucial to comprehend whether spindle speed, feed per tooth or the interaction between spindle speed and feed per tooth has a significant factor on cutting force reduction when increasing the feed rate. Accordingly, this manuscript presents an effect of spindle speed and feed per tooth in feed rate perspective on Inconel HX cutting force. Half-immersion down-milling and full-immersion down-milling was conducted experimentally using solid ceramic end-mill cutter. The results indicate that cutting force decreases and then increases after further increase in spindle speed, while cutting force increases with an increase in feed per tooth. Optimum spindle speed and optimum feed per tooth for low-cutting force were 21,400 rpm and 0.013 mm/tooth. Furthermore, feed per tooth was the significant factor which influenced the cutting force, whereas spindle speed, and the interaction between spindle speed and feed per tooth were not significant.

Metadata

Item Type: Article
Creators:
Creators
Email
Mohd Nor, N. A.
noraznan.namn@gmail.com
Kamarulzaman, N. F.
UNSPECIFIED
Zakaria, N. A. S.
UNSPECIFIED
Awang, N.
UNSPECIFIED
Baharudin, B. T. H. T.
UNSPECIFIED
Mohd Ariffin, M. K. A.
UNSPECIFIED
Leman, Z.
UNSPECIFIED
Subjects: T Technology > TJ Mechanical engineering and machinery > Machine design and drawing
T Technology > TJ Mechanical engineering and machinery > Hydraulic machinery
Divisions: Universiti Teknologi MARA, Shah Alam > Faculty of Mechanical Engineering
Journal or Publication Title: Journal of Mechanical Engineering (JMechE)
UiTM Journal Collections: UiTM Journal > Journal of Mechanical Engineering (JMechE)
ISSN: (eISSN):2550-164X
Volume: 8
Number: 2
Page Range: pp. 65-76
Official URL: https://jmeche.uitm.edu.my/
Item ID: 47677
Uncontrolled Keywords: Spindle speed, feed per tooth, down-milling
URI: https://ir.uitm.edu.my/id/eprint/47677

ID Number

47677

Indexing


View in Google Scholar

Edit Item
Edit Item