Sintered strength of ti-6Al-4V by metal injection molding (MIM) using palm stearin binder / N. H. Mohamad Nor...[et al.]

N. H., Mohamad Nor and M. H., Ismail and H., Husain and J. B., Saedon and M., Newishy (2019) Sintered strength of ti-6Al-4V by metal injection molding (MIM) using palm stearin binder / N. H. Mohamad Nor...[et al.]. Journal of Mechanical Engineering (JMechE), 16 (1). pp. 135-147. ISSN 1823-5514 ; 2550-164X

Download

[thumbnail of 36350.pdf] Text
36350.pdf

Download (328kB)

Abstract

Metal injection molding (MIM) is a metal working process used to compact Titanium, Ti-6Al-4V and the binder through injection moulding process. In this work, Titanium Ti-6Al-4V was mixed with palm stearin (PS) and polyethylene (PE) which act as a binder. Palm stearin (PS) is a potential binder system that can be used because it is inexpensive and highly available in Malaysia. Besides that, the application of MIM can reduce time and energy compared to the conventional process which high cost in production and difficulty of producing complex shape of materials. The green parts were then gone through of debinding process and sintering process. This project is to study the effect of the sintered Ti-Al-4V using palm stearin as a binder system. The properties of sintered specimen were investigated by physical properties such as its shrinkage and density. The average shrinkage of the sintered specimen was about 10.35% in length and 10.96% of width body of the specimen. Density of the sintered specimen was about 4.0343 g/cm3 and the tensile strength of the specimen was about 805.7 MPa.

Metadata

Item Type: Article
Creators:
Creators
Email
N. H., Mohamad Nor
UNSPECIFIED
M. H., Ismail
UNSPECIFIED
H., Husain
UNSPECIFIED
J. B., Saedon
UNSPECIFIED
M., Newishy
UNSPECIFIED
Subjects: T Technology > TJ Mechanical engineering and machinery
Divisions: Universiti Teknologi MARA, Shah Alam > Faculty of Mechanical Engineering
Journal or Publication Title: Journal of Mechanical Engineering (JMechE)
UiTM Journal Collections: UiTM Journal > Journal of Mechanical Engineering (JMechE)
ISSN: 1823-5514 ; 2550-164X
Volume: 16
Number: 1
Page Range: pp. 135-147
Official URL: https://jmeche.uitm.edu.my/
Item ID: 36350
Uncontrolled Keywords: Metal Injection Molding (MIM), palm stearin, Ti-6Al-4V, sintering and strength
URI: https://ir.uitm.edu.my/id/eprint/36350

ID Number

36350

Indexing


View in Google Scholar

Edit Item
Edit Item