Effect of focusing on sizing of side drilled bole (SDH) of different depth using various aperture size of PAUT ultrasonic probe / Wahiddah Long Mohd Nor Azizi

Long Mohd Nor Azizi, Wahiddah (2017) Effect of focusing on sizing of side drilled bole (SDH) of different depth using various aperture size of PAUT ultrasonic probe / Wahiddah Long Mohd Nor Azizi. [Student Project] (Unpublished)

Download

[thumbnail of PPb_WAHIDDAH LONG MOHD NOR AZIZI AS C 17_5.PDF] Text
PPb_WAHIDDAH LONG MOHD NOR AZIZI AS C 17_5.PDF

Download (1MB)

Abstract

This study used the advance instrument of PAUT, the OMNIScan MX2
provided by Malaysian Nuclear Agency to evaluate the size of SDH by using
different focusing and various aperture size of a probe. The type of probe used
is 5L64 and the specimen is the lOW Block that consist of Side Drilled Hole
(SDH) at different depths. The size of SDH is scanned by varying the parameter
of the instrument at 16 elements and 32 elements and focusing depth of 10mm,
45mm and 75mm. The elements used contribute to the probe aperture size and
gives different range of nearfield which are 20.87mm and 83.89mm. The sizes
of SDH are determined by normalization and the beam profiles are constructed.
Size of scanned SDH are compared focused which are 15mm, 25mm, 32mm,
43mm and 60mm. The percentage by the actual size of the hole on the lOW
block and the percentage error is calculated. The beam profiles showed the
depth of SDH where the beam errors of the focused holes are 23.33%,
116.67%, 20.00%, 53.33% and 120.00%. To minimize the percentage error,
bigger aperture size can be used to increases the probe sensitivity and the
focusing depth must be set within the range of the nearfield. The data obtained
from the experiment give a picture on how the aperture size and the focusing
depth that have been set on the instrument correlated to each other and also the
effect of both parameters on the size of the SDH scanned

Metadata

Item Type: Student Project
Creators:
Creators
Email
Long Mohd Nor Azizi, Wahiddah
UNSPECIFIED
Subjects: T Technology > TA Engineering. Civil engineering > Engineering mathematics. Engineering analysis
T Technology > TA Engineering. Civil engineering > Materials of engineering and construction
Divisions: Universiti Teknologi MARA, Pahang > Jengka Campus > Faculty of Applied Sciences
Item ID: 23644
Uncontrolled Keywords: Depths, Probe sensitivity, Side drilled hole
URI: https://ir.uitm.edu.my/id/eprint/23644

Fulltext

Fulltext is available at:
  • UNSPECIFIED
  • ID Number

    23644

    Indexing


    View in Google Scholar

    Edit Item
    Edit Item