Items where Division is "College of Engineering" and Year is 2026

A

Abdul Hamid, Abdul Hamid and Adull Manan, Nor Fazli and Ismail, Mohd Fauzi and Abdul Wahab, Abdul Malek and Khalit, Muhammad Ilham (2026) Development of warranty management visualisation for automotive aftermarket with integration of AI. (2026) Journal of Mechanical Engineering (JMechE), 23 (1): 2. pp. 19-38. ISSN 1823-5514 ; 2550-164X

Abdul Jalil, Abdul Malik Hussein and Kuntjoro, Wahyu and Mohd Nasir, Rizal Effendy and Saedon, Juri (2026) Optimization of 3D printing parameters for strength enhancement of PLA notched curved panels using Taguchi method. (2026) Journal of Mechanical Engineering (JMechE), 23 (1): 1. pp. 1-18. ISSN e-ISSN: 2550-164X

Aljanabi, Mohammed K. and Mohammed Abdulridha, Marwah and Hassan, Ekhlas and Al-Khafaji, Zainab (2026) Influence of heat input on mechanical and microstructure features of AISI 304 austenitic stainless-steel joints fabricated by TIG spot welding. (2026) Journal of Mechanical Engineering (JMechE), 23 (1): 8. pp. 132-144. ISSN e-ISSN: 2550-164X

Ametefe, Marvellous Agbeko and Jabire, Adamu Halilu and Abdu, Aliyu Babangida and Nyame, Davoro Fabian (2026) Solar-powered automated irrigation system using soil moisture sensing: a prototype for sustainable crop water management in Nigeria. (2026) Journal of Electrical and Electronic Systems Research (JEESR), 28 (1): 8. pp. 63-71. ISSN 1985-5389

C

C., H. Chin and Abdullah, S. and Jedi, A. (2026) Wavelet-based bumps identification in strain time histories for accelerated durability analysis. (2026) Journal of Mechanical Engineering (JMechE), 23 (1): 9. pp. 145-162. ISSN e-ISSN: 2550-164X

E

Eyvazov, Etimad and Abdullayev, Gasım (2026) Analysis of uniaxial stress state of an infinite sheet with complex geometry: impact of elliptical holes and linear cracks on structural stability. (2026) Journal of Mechanical Engineering (JMechE), 23 (1): 3. pp. 39-62. ISSN e-ISSN: 2550-164X

G

Goud, P. Ajay and Baba, Mohammad Sikindar (2026) An ANN-based fuel injection strategy for green hydrogen-enriched advanced CRDI Engine: the paradigm approach of NSGA-II and TOPSIS. (2026) Journal of Mechanical Engineering (JMechE), 23 (1): 12. pp. 212-237. ISSN e-ISSN: 2550-164X

M

Madzhi, Nina Korlina and Ridzuan, Mohamad Mukhmin (2026) IoT-based controlled environment system for optimized mushroom production. (2026) Journal of Electrical and Electronic Systems Research (JEESR), 28 (1): 4. pp. 26-31. ISSN 1985-5389

Mahadan, Mohd Ezwan and Abidin, Ahmad Farid and Mustapa, Rijalul Fahmi and Mat Yusoh, Mohd Abdul Talib and Hairuddin, Muhammad Asraf (2026) Data-driven for neutral-to-ground voltage: an evaluation of dataset using deep learning. (2026) Journal of Electrical and Electronic Systems Research (JEESR), 28 (1): 2. pp. 11-17. ISSN 1985-5389

Md Ali, Masalina and Alias, Siti Khadijah and Hisham, Munzir Izhar and Nik Pa, Nik Masmiati and Tumin, Najwa Delaila and Pahroraji, Hazriel Faizal and Mat Shah, Muhammad Amir and Abdullah, Bulan (2026) Eco-friendly corrosion mitigation of AISI 1020 steel in alkaline media using Arachis hypogaea shell extract: concentration and immersion time effects. (2026) Journal of Mechanical Engineering (JMechE), 23 (1): 6. pp. 101-115. ISSN e-ISSN: 2550-164X

Md Ramli, Siti Solehah and Ibrahim, Mohammad Nizam and Mohamad @ Ahmad, Anuar and Daud, Kamarulazhar and Saidina Omar, Abdul Malek (2026) Particle-swarm-optimized neural networks for baseline energy modelling in institutional buildings. (2026) Journal of Electrical and Electronic Systems Research (JEESR), 28 (1): 7. pp. 50-62. ISSN 1985-5389

Md Ramli, Siti Solehah and Ibrahim, Mohammad Nizam and Mohamad @ Ahmad, Anuar and Daud, Kamarulazhar and Saidina Omar, Abdul Malek and Ibrahim, Nor Shuhada (2026) Knee-based energy-saving measures selection using MOPSO and NSGA-II. (2026) Journal of Electrical and Electronic Systems Research (JEESR), 28 (1): 5. pp. 32-42. ISSN 1985-5389

Md Salleh, Mohd Fahmi and Abdul Wahid, Mazlan and Mohd Yusof, Ab Aziz and Mohd Rozaiddin, Umar Ikhwan and Kamaruzaman, Natrah and Sharudin, Hazim and Abu Kasim, Haszeme (2026) Experimental investigation on performance characteristics of a small-scale rotating detonation engine. (2026) Journal of Mechanical Engineering (JMechE), 23 (1): 5. pp. 84-100. ISSN e-ISSN: 2550-164X

Mehboob, Hussain and Hussain, Asim and Abdullah Chochan, Muhammad and Asif, Mansoor and Ugurenver, Abbas (2026) Machine learning–based fault detection for condition monitoring of a three-phase induction motor using current signature. (2026) Journal of Electrical and Electronic Systems Research (JEESR), 28 (1): 6. pp. 43-49. ISSN 1985-5389

Mohamad Noor, Norhayati and Abdullah @ Idris, Hasnain and Taib, Mohd Nasir and Mohd Fadzil, Fatin Farhana and Mohd Kasim, Linda and Ahmad, Azizah and Mohamat Kasim, Nazirah and Ismail, Noor Azila (2026) Sustainable radiation protection using kenaf fibre-reinforced composite walls. (2026) Journal of Electrical and Electronic Systems Research (JEESR), 28 (1): 11. pp. 90-96. ISSN 1985-5389

Mohd Kasim, Linda and Abdullah, Hasnain and Taib, Mohd Nasir and Abdul Jabar, Noorshafinas and Mohamad Noor, Norhayati and Ahmad, Azizah and Ismail, Noor Azila and Mohamat Kasim, Nazirah (2026) Effect of PET and POFA incorporation on microwave absorption of porous cement bricks. (2026) Journal of Electrical and Electronic Systems Research (JEESR), 28 (1): 3. pp. 18-25. ISSN 1985-5389

Mohd Kasim, Linda and Abdullah, Hasnain and Taib, Mohd Nasir and Mohamad Noor, Norhayati and Ahmad, Azizah and Ismail, Noor Azila and Mohamat Kasim, Nazirah (2026) Sustainable PET-POFA composite bricks for microwave absorption application. (2026) Journal of Electrical and Electronic Systems Research (JEESR), 28 (1): 10. pp. 83-89. ISSN 1985-5389

Mohd Najib, Muhammad Naufal and Ismail, Mohd Shahrom and Chi, Hieu Le and Ho, Quang Nguye and Samsudin, Azizul Hakim and Mahmud, Jamaluddin (2026) Predictive modelling of hybrid composite laminates buckling behaviour using Finite Element Analysis, refined Response Surface Methodology and Artificial Neural Network models with different data sizes. (2026) Journal of Mechanical Engineering (JMechE), 23 (1): 11. pp. 179-211. ISSN e-ISSN: 2550-164X

Musa, Nornisaadila and Adenan, Mohd Shahriman and Sadeon, Juri (2026) Microstructural refinement and texture enhancement of ER 5356 aluminium alloy by hybrid WAAM-forging. (2026) Journal of Mechanical Engineering (JMechE), 23 (1): 7. pp. 116-131. ISSN e-ISSN: 2550-164X

Mustapa, Rijalul Fahmi and Mohd Nordin, Atiqah Hamizah and Mahadan, Mohd Ezwan and Hairuddin, Muhammad Asraf (2026) Best subset selection multiple linear regression model for energy consumption prediction in educational buildings. (2026) Journal of Electrical and Electronic Systems Research (JEESR), 28 (1): 1. pp. 1-10. ISSN 1985-5389

N

Nor Kamal, Nor Afnan Zharif and Osman, Muhammad Khusairi and Awang Damit, Dayang Suhaida and Sulaiman, Siti Noraini and Zakaria, Nur Ulya Nasuha and Ahmad, Khairul Azman and A. Karim, Noor Khairiah (2026) Two-stage deep learning framework for myocardial infarction segmentation in late-gadolinium enhancement magnetic resonance imaging images. (2026) Journal of Electrical and Electronic Systems Research (JEESR), 28 (1): 12. pp. 97-108. ISSN 1985-5389

R

Ruslan, Ilyanie and Abd Kadir, Zulkiffli and Amer, Noor Hafizah and Mohd Nor, Elya (2026) Performance analysis of a nonlinear full vehicle model using double-lane change maneuver: a comparison with CarSim. (2026) Journal of Mechanical Engineering (JMechE), 23 (1): 4. pp. 63-83. ISSN e-ISSN: 2550-164X

S

Shah, Purvesh R. and Kadam, Mukundrao A. and Sutar, Kailasnath B. (2026) Investigation of carbon fiber-reinforced composites through electroless nickel plating. (2026) Journal of Mechanical Engineering (JMechE), 23 (1): 10. pp. 163-178. ISSN e-ISSN: 2550-164X

Suhaimi, Muhammad Izaaz Hazmii and Ahmat Ruslan, Fazlina and Abd Razak, Noorfadzli and Abdul Aziz, Mohd Azri and Johari, Juliana (2026) Spatiotemporal rainfall forecasting using deep learning under computational constraints: an IMERG-based study. (2026) Journal of Electrical and Electronic Systems Research (JEESR), 28 (1): 9. pp. 72-82. ISSN 1985-5389