Items where Subject is "TP Chemical technology"

Group by: Creators | Item Type
Number of items at this level: 127.

Article

Effect of different composition and emulsifier types on the stability of red palm oil emulsified powder / Ghina Sovia Putri ... [et al.]. (2023) Malaysian Journal of Chemical Engineering and Technology (MJCET), 6 (2): 14. pp. 160-173. ISSN 2682-8588

Significant impact of melt-blend and hot-press technique operating condition on polyethylene/thermoplastic starch/aloe vera gel film properties / Siti Fatma Abd Karim ... [et al.]. (2023) Malaysian Journal of Chemical Engineering and Technology (MJCET), 6 (2): 9. pp. 119-126. ISSN 2682-8588

Graphite as a potential adsorbent for ammonium ions removal / Haszalina Abdul Halim, Nur Alwani Ali Bashah and Norhusna Mohamad Nor. (2022) ESTEEM Academic Journal, 18. pp. 31-40. ISSN 2289-4934

Isolation and tentative identification of antioxidative constituents from dichloromethane extract of muraya koenigii leaves using chromatographic technique / Norhakimy Abdul Majid and Aiza Harun. (2019) Gading Journal for Science and Technology, 2 (1). pp. 31-37. ISSN 2637-0018

Mechanical spectroscopy of multiwalled carbon nanotube-filled polyurethane nanocomposites / Shahrul Azam Abdullah and Lars Frormann. (2022) Journal of Mechanical Engineering (JMechE), 19 (2): 13. pp. 205-218. ISSN (eISSN): 2550-164X

Separation methods in the food industry: An exploration of reverse osmosis, evaporation and freeze concentration applications / Nurul Amalia Farhana Abu Bakar and Farah Hanim Ab Hamid. (2023) Malaysian Journal of Chemical Engineering and Technology (MJCET), 6 (2): 2. pp. 47-60. ISSN 2682-8588

The effect of seashells as filler in epoxy composites / Nor Azwin Ahad, Kwan Suk Lum and Khairulnisa Halim. (2023) Science Letters (ScL), 17 (2): 10. pp. 119-129. ISSN 2682-8626

The influence of cutting parameter under sustainable machining approaches on surface roughness of AISI 4340 / Ahsana Aqilah Ahmad, Jaharah A. Ghani and Che Hassan Che Haron. (2023) Journal of Mechanical Engineering (JMechE), 12 (1): 4. pp. 63-80. ISSN 1823-5514 ; 2550-164X

Molar ratio variation on high pressure methanol production: Quantitative safety analysis / Mohd Aizad Ahmad, Anis Syamimi Abd Rashid and Zulkifli Abdul Rashid. (2023) Malaysian Journal of Chemical Engineering and Technology (MJCET), 6 (2): 8. pp. 107-118. ISSN 2682-8588

Quantitative safety assessment for reactor size variation on high pressure methanol production / Mohd Aizad Ahmad, Anis Adila Rozman and Zulkifli Abdul Rashid. (2023) Malaysian Journal of Chemical Engineering and Technology (MJCET), 6 (2): 3. pp. 61-74. ISSN 2682-8588

The densification of hydroxyapatite from eggshell waste at different sintering temperature / Natasha Ahmad Nawawi ... [et al.]. (2023) Journal of Mechanical Engineering (JMechE), 12 (1): 14. pp. 269-281. ISSN 1823-5514 ; 2550-164X

Adaptive Neuro Fuzzy Inference System (ANFIS) modelling for quality estimation in palm oil refining process / Nur Syuhada Ali ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 8 (1). pp. 36-47. ISSN 18235514

Estimation of kinetic parameter using Aspen Plus on the transesterification of palm oil with methanol to produce fatty acid methyl ester / Nur Alwani Ali Bashah ... [et al.]. (2022) ESTEEM Academic Journal, 18. pp. 79-89. ISSN 2289-4934

Growth kinetic of rhizopus sp. immobilised on loofah sponge for whole-cell biocatalyst in different cultivation media / Azlin Suhaida Azmi … [et al.]. (2022) Malaysian Journal of Chemical Engineering and Technology (MJCET), 5 (1): 5. pp. 38-42. ISSN (e-ISSN): 2682-8588

Identification and quantitative analysis of rice aroma compounds in black jasmine and Sung-yod Korat rice from Nakhon-Ratchasima province, Thailand / Vanida Choomuenwai. (2017) ESTEEM Academic Journal, 13. pp. 83-90. ISSN 1675-7939

Palm oil a saturated fat: a case of incidental or tactical classification / Arshad Hashim. (1996) GADING Jurnal Akademik ITM Cawangan Pahang, 2 (1): 2. pp. 11-23. ISSN 0128

The effect of eggshell powder (ESP) filler on the properties of purple sweet potato (PSP) starch bioplastics / Faiezah Hashim ... [et al.]. (2024) Scientific Research Journal, 21 (1): 7. pp. 117-131. ISSN 1675-7009

Brackish water treatment with local filter media and reverse osmosis using application of internet of things technology / Surya Hermawan ... [et al.]. (2022) Journal of Mechanical Engineering (JMechE), 11 (1): 8. pp. 147-164. ISSN 1823-5514 ; 2550-164X

Effect of sequential pre-treatment on the thermal behavior of pre-treated palm empty fruit bunch using thermal gravimetric analyzer / Nur Nasulhah Kasim ... [et al.]. (2024) Scientific Research Journal, 21 (1): 8. pp. 133-143. ISSN 1675-7009

Effect of particle size, shape, and weight percentage of hydroxyapatite (HA) on rheological behaviour of polycaprolactone/hydroxyapatite (PCL/HA) composites / Zulaisyah Laja Besar and Suffiyana Akhbar. (2021) Malaysian Journal of Chemical Engineering and Technology (MJCET), 4 (2): 5. pp. 132-136. ISSN (e-ISSN): 2682-8588

Effects of printing parameters on the mechanical strength of thermoplastics 3D printed specimens / Mohammad Azeeb Mazlan ... [et al.]. (2023) Journal of Mechanical Engineering (JMechE), 12 (1): 6. pp. 101-117. ISSN 1823-5514 ; 2550-164X

Effects of different concentration of both naphthaleneacetic acid and 6-benzylaminopurine in callus induction of capsicum frutescens / Nursuria Md. Setamam. (2019) Gading Journal for Science and Technology, 2 (1). pp. 23-30. ISSN 2637-0018

Pb2+ Removal by Using Activated Coconut Waste Modified with Different Metal Oxide Nanoparticles. (2022) ESTEEM Academic Journal, 18. pp. 1-10. ISSN 1675-7939

Synthesisation of zinc oxide nanowires via hybrid microwave assisted sonochemical technique at various microwave power / Maryam Mohammad … [et al]. (2023) Journal of Mechanical Engineering (JMechE), 20 (3): 15. pp. 293-311. ISSN 1823-5514 ; 2550-164X

The application of natural dyes for natural rubber latex foam products / Nipawan Pongprom. (2017) ESTEEM Academic Journal, 13. pp. 65-74. ISSN 1675-7939

Correlation of ZnO surface morphology and sensing performance of EGFET nitrate sensor / A. B. Rosli ... [et al.]. (2022) Journal of Mechanical Engineering (JMechE), 11 (1): 3. pp. 65-80. ISSN 1823-5514 ; 2550-164X

Dual phase zirconium-based metal-organic gel (Zr-MOG) as chromium (VI) removal via photoreduction / Anis Muneerah Shaiful Bahari ... [et al.]. (2023) Malaysian Journal of Chemical Engineering and Technology (MJCET), 6 (2): 1. pp. 36-46. ISSN 2682-8588

Investigation of antioxidant and antimicrobial activity of zingiber officinale roscoe oleosin on airborne pathogenic microorganisms / Mohd Faez Sharif... [et al.]. (2017) ESTEEM Academic Journal, 13. pp. 35-44. ISSN 1675-7939

Performance of plant-based coagulants in removing turbidity and chemical oxygen demand (COD) in industrial wastewater: a systematic review and meta-analysis / Aimi Shazreen Shukri ... [et al.]. (2023) Journal of Sustainable Civil Engineering & Technology (JSCET), 2 (2): 8. pp. 91-103. ISSN 2948-4294

The bioactivity potential of Acmella paniculata plant extract in antioxidant activity by two different extraction methods / Rajina Shahmir Sivaraj ... [et al.]. (2023) Scientific Research Journal, 20: 1. pp. 1-16. ISSN 1675-7009

Absorption of anionic surfactant on surface of reservoir minerals in alkaline-surfactant-polymer system / Tengku Amran Tengku Mohd … [et al.]. (2021) Malaysian Journal of Chemical Engineering and Technology (MJCET), 4 (2): 8. pp. 124-131. ISSN (e-ISSN): 2682-8588

A novel adsorbent formed from blast furnace slag by alkali fusion for phosphate ions removal / Takaaki Wajima. (2017) ESTEEM Academic Journal, 13. pp. 1-17. ISSN 1675-7939

Researcher Profiles : Faculty of Chemical Engineering. (2022)

Effect of EDX accelerating voltage on ZnO thin film doped with sodium / Benedict Wen Cheun Au ... [et al.]. (2018) Gading Journal for Science and Technology, 1 (1). pp. 1-6. ISSN 2637-0018

Preparation and characterization of activated palm kernel shell/carboxylated nitrile butadiene rubber (APKS/XNBR) vulcanizate / Syazwani Aqilah Zainal ... [et al.]. (2024) Journal of Mechanical Engineering (JMechE), 21 (1): 12. pp. 217-235. ISSN 1823-5514 ; 2550-164X

Book Section

ASH: from waste to criminal investigation tool / Rumiza Abd Rashid … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 156. (Submitted)

The effect of au-seeded thickness to the gas sensing properties of ZnO nanostructures obtained by mist-atomization on heated substrates / Nurul Afaah Abdullah … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 128. (Submitted)

Electrospray drying for producing Active Pharmaceutical Ingredients (API) nanoparticles / Noor Fitrah Abu Bakar … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 138. (Submitted)

Khaya senegelansis: a natural oil adsorbent for produced water treatment / Habsah Alwi … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 139. (Submitted)

Formulation of Isopropyl Laurate (IPL) drilling fluid / Azlinda Azizi … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 137. (Submitted)

Elais Guineensis (Palm) lignocellulosic biomass dissolution with aqueous ionic liquid for biofuel production / Intan Suhada Azmi … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 103. (Submitted)

Lemongrass fibre as lost circulation material in drilling fluid / Nurul Aimi Ghazali … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 140. (Submitted)

Nanoparticle technology in Aqueous Carbon Dioxide (CO2) foam for Enhanced Oil Recovery (EOR) / Azwan Harun … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 94. (Submitted)

Ultrasonic wave and Ph enhanced the formation of TiO2 nanotube structure / Nur Aimi Jani … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 154. (Submitted)

Performance of porous asphalt with nanosilica modified asphalt binder / Khairil Azman Masri. (2018) In: The Doctoral Research Abstracts. IPSis Biannual Publication, 13 (13). Institute of Graduate Studies, UiTM, Shah Alam.

Studies on structural and electrical properties on Lini0.5mg0.5vo4 For Li-Ion Batteries / Aida Fazliza Mat Fadzil … [et al.]. (2013) In: RIID 2013: Optimizing Innovation for Global Commercialization Research, Invention, Innovation Design: RIID 2013. Division of Research, Industrial Linkages and Alumni, UiTM Cawangan Melaka, Alor Gajah, Melaka, p. 13. ISBN 978-967-0637-02-0 (Submitted)

First principles studies on properties of Pb(II), Sn(II) and Ge(II) ferroelectric materials using density functional theory / Mohamad Fariz Mohamad Taib. (2015) In: The Doctoral Research Abstracts. IPSis Biannual Publication, 7 (7). Institute of Graduate Studies, UiTM, Shah Alam.

Production of new growing media for algae in biodiesel production / Mohibah Musa … [et al.]. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 98. (Submitted)

Corrosion inhibtion studies on newly synthesized methylbenzoyl thiourea derivatives / Noor Khadijah Mustafa Kamal, Karimah Kassim and Adibatul Husna Fadzil. (2014) In: IIDEX 2014: invention, innovation & design exposition. Research Innovation Business Unit, Shah Alam, Selangor, p. 159. (Submitted)

Innovative green material from nano-cellulose bio-plastic composite / Dr. Siti Norasmah Surip … [et al.]. (2012) In: RIID 2012: Innovation for Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka, p. 70. (Unpublished)

Monograph

Petronas Refinery & Petrochemical Corporation Sdn Bhd / Aini Nadia Nurfaiz Mohd Faizal. (2023) Industrial Training. Faculty of Business and Management. (Submitted)

Hong Kong Sa Sa (M) Sdn Bhd / Zulfa Hidayah Mohd Razali. (2023) Industrial Training. Faculty of Business and Management. (Submitted)

PETRONAS Lubricants International Sdn. Bhd. / Aisyah Shabri. (2020) Industrial Training. Faculty of Business and Management. (Submitted)

Conference or Workshop Item

Comparative study on calixarenes in drug encapsulation and delivery / Muhammad Syimir Ab Hamid, Mohd Haris Ridzuan Ooi and Ch’ng Pei Eng. (2021) In: UNSPECIFIED.

Leaching of precious metals from waste printed circuit boards with different leaching reagents / Ainin Syakirah Abdul Rahim and Chang Siu Hua. (2020) In: UNSPECIFIED.

Comparative study on treatment of wastewater using various types of natural coagulant / Najwa Azis, Nor Ain Shakirah Abdullah and Nurul Izza Husin. (2020) In: UNSPECIFIED.

Comparative adsorption studies of alginate-based beads for dye removal / Maisarah Ahmad and Faraziehan Senusi. (2020) In: UNSPECIFIED.

Formation of dihydroxystearic acid (DHSA) from epoxidized palm olein by hydrolysis and its kinetic model / Arif Aminuddin Ahmad Zulkifli, Mohd Jumain Jalil and Aliff Farhan Mohd Yamin. (2020) In: UNSPECIFIED.

Production of epoxidized palm oil derived oleic acid by using peracid mechanism / Pascal Perrin Anaj Jites and Mohammad Jumain Jalil. (2021) In: UNSPECIFIED.

Photocatalytic oxidation of waste cooking oil using zeolite ZSM-5 & TiO2 as catalyst: a parametric optimization study via response surface methodology / Diyana Natasha Darimi and Siti Khatijah Jamaludin. (2020) In: UNSPECIFIED.

Multielement extraction from aqueous solutions by palm kernel fatty acid distillate / Jenifer Dennis and Chang Siu Hua. (2021) In: UNSPECIFIED.

Reactor: effects of different pressure and temperature analysis using ANSYS / Nurul Ain Ghazali, Ts Dr Noor Iswadi Ismail and Ir Mohd Azahar Mohd Ariff. (2021) In: UNSPECIFIED.

Edible nanocoating: The properties of different casting methods and different types of nanoparticles incorporated with polysaccharides-based materials / Nur Haznina Haron, Noor Asnida Asli, and Nadya Hajar. (2021) In: UNSPECIFIED.

NatMag cleaner / Hani Hasriena Hasrin ... [et al.]. (2021) In: International Exhibition & Symposium on Productivity, Innovation, Knowledge, Education & Design (i-SPiKe 2021).

A comparative study of hydrothermal treatment for value-added product from various type of biomass / Aida Nadiah Hazeli and Dr Siti Sabrina Mohd Sukri. (2020) In: UNSPECIFIED.

Review on extraction of antioxidant from Hibiscus Rosa Sinensis using natural deep eutectic solvent / Dr Nor Fariza Ismail and Mimi Ayuni Mazlan. (2020) In: UNSPECIFIED.

Eco-nic Firestarter / Nurul Atikah J Effendy and Ku Mahiran T Nor. (2020) In: UNSPECIFIED.

Regenerated kenaf core cellulose hydrogels and films prepared via pre-cooled method / Adam Khairul Faiz ... [et al.]. (2021) In: International Exhibition & Symposium on Productivity, Innovation, Knowledge, Education & Design (i-SPiKe 2021).

Comparison of coffee wastewater treatment technologies / Ku Muhammad Syamil Ku Azif and Nor Fariza Ismail. (2021) In: UNSPECIFIED.

Adsorption of copper ions from aqueous solutions by modified alginate beads / Muhamad Zharif Md. Isa and Faraziehan Senusi. (2020) In: UNSPECIFIED.

Ready-to-bake (RTB) cookie dough / Muna Shakirah Mohamad, Norhidayah Abdullah and Nursyadah Nordin. (2021) In: International Exhibition & Symposium on Productivity, Innovation, Knowledge, Education & Design (i-SPiKe 2021).

A comparison study of different acid pretreatment technique on the removal of lignin and reducing sugar production from different biomass / Mohamed Fittri Mohamed Rosedi and Dr. Siti Sabrina Mohd Sukri. (2020) In: UNSPECIFIED.

Instant beef stew / Nursyadah Nordin, Norhidayah Abdullah and Muna Shakirah Mohamad. (2021) In: International Exhibition & Symposium on Productivity, Innovation, Knowledge, Education & Design (i-SPiKe 2021).

Optimization of catalyst elemental composition and reaction parameters for methanol synthesis on Cu/Zn/Al/Zr catalyst / Dr. Muhammad Zahiruddin Ramli and Nur Iffah Nabihah Muhammad Anuar. (2020) In: UNSPECIFIED.

Investigation of modified alumina for remediation of contaminated oil: a review / Muhammad Zahiruddin Ramli and Nurul Najwa Zam Bere. (2020) In: UNSPECIFIED.

Synthesis and characterization of mixed oxides catalyst to produce fame / Siti Athirah Ramli and Dr Wan Zuraida Wan Kamis. (2021) In: UNSPECIFIED.

Prediction of fruit ripening by Artificial Neural Network based on relationship between pectin and image analysis / Aisyah Sakina Shahrin ... [et al.]. (2020) In: UNSPECIFIED.

Production of high quality bio-oil via pyrolysis of lignocellulosic biomass: a review on role of plastic and catalyst types / Siti Maryam Wasli and Hamizura Hassan. (2021) In: UNSPECIFIED.

Thesis

Improvement of granules characterization using poly-ethylene glycol (PEG) as a binder via melt granulation in pressure swing granulator fluidized bed / Salinda Ab Ghani. (2016) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Detection of harmful substances in underarm product using optical character recognition and support vector machine / Nur Hidayah Abdul Ghani. (2023) Degree thesis, thesis, Universiti Teknologi MARA, Melaka.

The effect of cosmos caudatus on chronic repetitive forced swimming stress / Mohd Hadzrul Hisham Abdul Manaf. (2016) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Study on anthocyanin in pigmented plants and its application in Malaysian steamed rice cake 'apam kukus' / Siti Azima Abdul Muttalib. (2018) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Investigation on the effect of infiltration parameters to the mechanical performance of biomorphic silicon carbide / Noor Leha Abdul Rahman. (2020) PhD thesis, thesis, Universiti Teknologi MARA.

Speciation of Biochemical Oxygen Demand (BOD) for wastewater and surface water / Norizan Abdullah. (2013) Masters thesis, thesis, Universiti Teknologi MARA.

Oxygen sensing behaviors of Eu (Ba1-xPrx)2Cu3O7-δ and Eu1-yPrBa2Cu3O7-δ ceramic rods with hot-spot / Ikhwan Adzam. (2015) Masters thesis, thesis, Universiti Teknologi MARA.

Quantitative risk and economic loss risk assessment for pressure variation on methanol production / Mohd Aizad Ahmad. (2021) PhD thesis, thesis, Universiti Teknologi MARA.

Adsorption of zinc from aqueous solution using zeolite / Zaidatul Fatimah Ahmad. (2009) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Senjata keris warisan seni Melayu / Engku Nor Azira Engku Raham. (2003) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

In vitro and in vivo antioxidant studies of curcuminoids extract and fractions / Noorhaslina Hashim. (2011) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Ternary blended binder system (TBBS) for solidification/stabilisation (S/S) technique in treating liquid mineral sludge / Nurliyana Ismail. (2019) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Pyrolytic oil synthesis via catalytic microwave assisted pyrolysis of automotive paint sludge by using ZSM-5 catalyst / Zakiuddin Januri. (2017) PhD thesis, thesis, Universiti Teknologi MARA.

Catalytic transesterification of waste cooking oil into biodiesel using various potassium based Al2O3 catalyst / Muhammad Amirrul Hakim Lokman Nolhakim. (2023) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

The effects of EDTA on the isolation of cellulose from banana stem using atmospheric soda pulping / Nurul Amal Nadhirah Mohamad. (2023) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Optimization of synthesis and application processes for composite crosslinked chitosan derivatives fly ash for removal of Reactive Red 120 dye / Ibrahim Awad Mohammed. (2023) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Development and characterisation of biodegradable polymer derived from Tacca leontopetaloides starch and biochar rice husk / Ainatul Mardhiah Mohd Amin. (2019) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Analysis of glucose level detection device performance by chemometrics approached and diffuse reflectance fourier transform near infrared spectroscopy / Noor Nazurah Mohd Yatim. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

The compatibility of rice husk ash (RHA) and sewage sludge ash (SSA) as source materials in producing geopolymer mortar / Zaidahtulakmal Mohd Zahib. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

The efficacy of Super-oxidised Hydrogel versus Aqueous Cream in treatment of mild to moderate Atopic Dermatitis / Nabia Idaam Mustapa Albakari. (2019) Masters thesis, thesis, Universiti Teknologi MARA (Kampus Sg. Buloh).

Performance of zeolitic imidazolate framework-8 on quarry dust-based ceramic hollow fibre membranes for CO2 and CH4 permeation / Nur Ain Shazwani Roslee Ab. Jamal. (2023) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Synthesis and characterization of Polyaniline-Chitosan composite and its application as Electrochemical sensor for Perfluorooctanoic Acid / Nur Farahin Suhaimi. (2023) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Effect of vanadium and silver nanoparticles on the structural, DC conductivity, and optical properties of erbium-doped borate glass / Nur Adyani Zaini. (2023) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Student Project

Synthesis and characterizations of metal activated cellulose of cotton waste to produce solid fuel / Ahmad Ikhwan Muaz Abd Rahman. (2022) [Student Project] (Unpublished)

Investigative study of leachate degradation in soil from bottom ash as filling embankment in road pavement / Muhammad Azam Abdul Rahim. (2022) [Student Project] (Unpublished)

Hydrothermal synthesis of cobalt doped tin (IV) oxide for microplastic removal / Nur Aina Shahida Ahmad. (2022) [Student Project] (Unpublished)

Removal of microplastics in coagulation-flocculation using polyglutamic acid / Arbaie Ahmad Faizil Yap. (2022) [Student Project] (Unpublished)

Synthesis of chitosan via biological deacetylation of chitin biopolymer / Nur Ain Ahmad Kamal. (2022) [Student Project] (Unpublished)

Synthesis of Catechol/Polyaniline/Alginate Based Composite Beads for removal of methylene blue dye / Anis Nazira Alizan. (2022) [Student Project] (Unpublished)

Study on the mobile phase composition and flow rate parameter for tributyrin using high performance liquid chromatography-uv detector (HPLC-UV) / Fariswan Atan. (2019) [Student Project] (Unpublished)

Development of low cost catalyst-cobalt system for engine emission control / Azhary Awang and Shamsul Irwan Ismail. (2002) [Student Project] (Unpublished)

Synthesis of polyaniline/ catechol/alginate based composite beads for removal of heavy metal ions / Nurul Khairani Aziz. (2022) [Student Project] (Unpublished)

Electrocoagulation process for removal of emulsion oil using zinc electrode via response surface methodology / Izzah Syahida Hassha’ari. (2022) [Student Project] (Unpublished)

Physicochemical characterization of edible bird nest extract as functional ingredients in the instant soup application / Mohamad Haziq Aiman Ismail. (2022) [Student Project] (Unpublished)

The economic effectiveness comparison between biological and chemical methods in controlling rat population for oil palm plantation / Mohd Syaifful Nizzar Ismail. (2017) [Student Project] (Unpublished)

Heavy metals determination in brinjals and tomatoes / Normaliza Ismail. (2009) [Student Project] (Unpublished)

Kajian terhadap pembinaan tanur gas / Mohd Azmi Md. Yusoff. (1994) [Student Project] (Unpublished)

Modification of graphene oxide with eggshell adsorbent via impregnation method for fluoride removal in wastewater / Mohamad Ikmal Mohamad Azmir. (2017) [Student Project] (Unpublished)

Effect of operating parameter on oil spill removal from seawater by PKFAD/chitosan-coated magnetic nanosorbents / Nur Amalin Aisyah Mohd Hassan. (2022) [Student Project] (Unpublished)

Biosorption of heavy metals in leachate by using coconut shell activated carbon as an adsorbent / Nabilah Adila Mohd Tajudin. (2017) [Student Project] (Unpublished)

Awareness of local food handlers towards food hygiene: a study on local food premise in UiTM Dungun and surrounding areas / Nik Nur Halmemi Nik Mohd Halmi & Nurul Izatul Akmal Abdul Rahman. (2016) [Student Project] (Submitted)

Molecular dynamics simulation on the adsorption behaviour of ibuprofen onto polyethylene microplastic / Muhammad Ikhwan Nizam. (2022) [Student Project] (Unpublished)

Co-pyrolysis of orange peel and polystyrene for bio oil production / Farah Nur Syahira Nordin. (2022) [Student Project] (Unpublished)

Polypropylene microplastics removal using Fe based electrode via electrocoagulation method / Norfaezatul Alysa Othman. (2022) [Student Project] (Unpublished)

Effect of modified molasses-based distillery wastewater on plant growth and development by foliar application / Nur Ain Atiqah Ramli. (2022) [Student Project] (Unpublished)

Production of biodiesel from palm oil by using calcium oxide (cao) supported on alumina beads / Nurul Aqilah Sham Shul Bahri. (2019) [Student Project] (Unpublished)

A review on street stall food handlers to apply food safety / Nor Fatihah Sudin and Norsil Awati Mustakim. (2017) [Student Project] (Unpublished)

Pot experimental of H2S spent AC adsorbent as a potential green soil conditioner to enhance plant growth / Nur Alis Zainuddin. (2022) [Student Project] (Unpublished)

Research Reports

Development of hydrophilic Si02/Ti02 double layers coating for automotive glass application by low-cost dip coating method / Muhammad Zahiruddin Ramli, Nur Fadzeelah Abu Kassim and Nurulhuda Amri. (2011) [Research Reports] (Unpublished)

This list was generated on Fri Mar 29 09:41:42 2024 UTC.