Items where Subject is "Aeronautics. Aeronautical engineering"

Group by: Creators | Item Type
Number of items at this level: 50.

Article

On the Effect of Central Jet in Solid Cone Pressure-Swirl Atomizers / Ahmad H. A. Hamid ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 260-271. ISSN 18235514

Experimental Investigation on the Ballistic Resistance of Aluminium Plate under High Velocity Impact / Mohd Rozaiman Aziz ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (3). pp. 12-24. ISSN 18235514

The Effects of Tail-Tilt on the Yaw Stability of Baseline-V Blended Wing Body Aircraft / Nur Syazwani C.M and Rizal E.M. Nasir. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 60-73. ISSN 18235514

Design of power device sizing and integration for solar-powered aircraft application / Safyanu Bashir Danjuma, Zamri Omar and Mohd Noor Abdullah. (2021) Journal of Mechanical Engineering, 18 (3): 13. pp. 215-232. ISSN https://jmeche.uitm.edu.my/

Longitudinal static stability of a blended wing-body unmanned aircraft with canard as longitudinal control surface / Rizal E. M. Nasir, Wahyu Kunjoro and Wirachman Wisnoe. (2012) Journal of Mechanical Engineering (JMechE), 9 (1). pp. 99-121. ISSN 1823-5514 ; 2550-164X

The design of a high aspect ratio HALE aircraft composite wing. part II: buckling and flutter speed analysis / Bambang K. Hadi and IndraPermana. (2015) Journal of Mechanical Engineering (JMechE), 12 (2). pp. 14-25. ISSN 1823-5514 ; 2550-164X

Design selection for new in-flight food delivery and waste collection system of commercial passenger transport aircraft using TOPSIS / Farah Diana Ishak and Fairuz Izzuddin Romli. (2021) Journal of Mechanical Engineering, 18 (3): 13. pp. 233-245. ISSN 2550-164X

Quality Function Deployment for New Standing Cabin Concept of Commercial Transport Aircraft / Norhafizah M. Dasuki and Fairuz I. Romli. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (5). pp. 247-257. ISSN 18235514

The Effect of Elevons Deflection to Aerodynamic Coefficients of A Tail-less Blended Wing-Body Planform / Rizal E. M. Nasir ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (4). pp. 151-166. ISSN 18235514

Freestream Velocity Correction in Narrow Channels / Helmey Ramdhaney Mohd Saiah ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 54-66. ISSN 18235514

Aerodynamic Performances of MAV Wing Shapes / N. I. Ismail...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (2). pp. 187-198. ISSN 18235514

Stall behavior curved planform wing analysis with low reynolds number on aerodynamic performances of wing airfoil eppler 562 / Setyo Hariyadi S.P. ... [et al.]. (2022) Journal of Mechanical Engineering (JMechE), 19 (1): 20. pp. 201-220. ISSN (eISSN): 2550-164X

Design and flight analysis of the Kenyalang-1 fuel cell powered unmanned aircraft / Thomas A. Ward. (2012) Journal of Mechanical Engineering (JMechE), 9 (1). pp. 19-44. ISSN 1823-5514 ; 2550-164X

Wind Tunnel Tests of UiTM Blended Wing Body - Unmanned Aerial Vehicle (BWB-UAV) Prototype / Wirachman Wisnoe ...[et al.]. (2017) Journal of Mechanical Engineering (JMechE), SI 4 (3). pp. 234-245. ISSN 18235514

Thesis

Digital compass for inertial navigation system / Nuridora Abdul Razak. (2006) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Comparative study on satellite base air monitoring system / Norsyuhaimy Abdul Shukor. (2010) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Study of aerodynamics on the analysis for Blended Wing Body (BWB) Unmanned Aerial Vehicle (UAV) using Computatonal Fluid Dynamics (CFD) for high subsonic flow / Mohd Yusof Safaruddin Abdulawi. (2006) Degree thesis, thesis, Universiti Teknologi MARA.

Experimental aerodynamics of Blended Wing Body (BWB) unmanned aerial vehicle (UAV) with elevator deflection of +5° and -5° using wind tunnel (Mach number 0.1-0.15) / Che Wan Zaidie Che Wan Idris. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Graphical representation of digital compass and altimeter / Siti Zuraini Harun. (2014) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Design of Blended Wing Body (BWB) Unmanned Aerial Vehicle (UAV) engine nacelle / Asrul Azuwar Hashim. (2006) Degree thesis, thesis, Universiti Teknologi MARA.

Thrust test stand for pulse jet engine / Hamirul Adli Hashim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Develop a remote control aircraft for crop spraying / Noor Shuhada Hussin. (2004) Degree thesis, thesis, Universiti Teknologi MARA.

Flight performance analysis of a radio controlled airplane / Luthffi Idzhar Ismail. (2010) Degree thesis, thesis, Universiti Teknologi MARA.

Sliding mode control design using linear matrix inequality for unmanned aerial vehicle / Nor Laili Mahmud. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

The concept of vertical take-off and landing by using UAV mini model / Abdullah Syahril Mat Jani. (2004) Degree thesis, thesis, Universiti Teknologi MARA.

Effects of canard configuration on the aerodynamics of blended wing body at low mach number / Zurriati Mohd Ali. (2015) PhD thesis, thesis, Universiti Teknologi MARA.

Adjustable free boundary layer floor mechanism for UiTM aerospace wind tunnel / Mohd Aswadi Mohd Razali. (2009) Degree thesis, thesis, Universiti Teknologi MARA.

Design of composite material that promoting in-plane auxetic behaviour / Syarmizar Mohd Safki. (2006) Degree thesis, thesis, Universiti Teknologi MARA.

Design a small wind tunnel studies for boundary layer experiment / Mohd Effandy Mukhtar. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

The strengthening of aluminium 2024 sheet by accelerated aging / Syafruddin Noer. (2007) Masters thesis, thesis, Universiti Teknologi MARA.

Aeronautical revenues optimisation model (AROM) for regional airports via airside operations stochastic baseline matrix analysis / Wan Mazlina Wan Mohamed. (2016) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Student Project

Aerodynamic performance of MAV wing with fuselage and stabilizer \ Muhammad Izzuddin Arif Abdul Samad. (2017) [Student Project] (Unpublished)

The experience of MAS in the operation and maintenance of aero-gas turbine engines / Mohamed Saiful Hady Ahmad and Azirul Fahmie Soid. (1995) [Student Project] (Unpublished)

Induced drag analysis of multi-winglets for aerodynamic performance on NACA 23015 / Zaim Ariefin Azwan Affendi Nual. (2020) [Student Project] (Unpublished)

Aerodynamics performance of optimal wing profile on MAV wing / Siti Khatijah Hamdan. (2017) [Student Project] (Unpublished)

Aerodynamics performance of optimal wing profile on MAV wings / Siti Khatijah Hamdan. [Student Project] (Submitted)

The investigation of fin plate of MiG-29 aircraft made of aluminium alloy D19 using conventional ultrasonic testing (A-Scan System) / Siti Nur Hasanah Hamzah. (2013) [Student Project] (Unpublished)

Aerodynamic performance of O-ring paper plane \ Amirul Ashraf Hassan. (2017) [Student Project] (Unpublished)

Experimental aerodynamics of washout twist morphing MAV wing / Muhammad Hakim Mohd Hafiz. (2017) [Student Project] (Unpublished)

The study of the aircraft navigation systems: radio navigation system as a model / Ahmad Nazri Nasir and Ruszaini Ariffin. (2000) [Student Project] (Submitted)

An aerodynamic performance of MAV wings / Nik Muhammad Muzammil Nik Mustapa. (2016) [Student Project] (Unpublished)

SME aerospace: improving bonding shop processes / Abdul Rahim sakrani and Halisyahbana Hamzah. (1997) [Student Project] (Unpublished)

Entrepreneurship Project

Case Study : NZAA Trading / Syaidatul Umairah Solehah Abas. (2020) [Entrepreneurship Project] (Unpublished)

Eurodynamic Sdn. Bhd. / Sharina Mohd Nasir, Atfina Naemah Omar and Nursalwa Samsuri. [Entrepreneurship Project] (Unpublished)

Research Reports

The formation of precipitate influence resistant on stress corrosion cracking of AA 7075 alloy / Rasdi Deraman, Mohd Rozaiman Aziz and Yusli Yaakob. (2009) [Research Reports] (Unpublished)

Experimental determination of the effect of turbulent intensity on aerodynamic characteristics of Remotely Piloted Vehicle / Zurriati Mohd Ali, Ow Chee Sheng and Mohd Zulkifly Abdullah. (2007) [Research Reports] (Unpublished)

Aerodynamics prediction of multi-purpose UAV using wind tunnel experimental approach / Ghazirah Mustapha @ Mustafa, Zurriati Mohd Ali, Wirachman Wisnoe. (2009) [Research Reports] (Unpublished)

Design parameters for the development of wing test rig for static test experiment / Ramzyzan Ramly … [et_al.]. (2010) [Research Reports] (Unpublished)

A new fuel cell powered aerospace propulsion system / Thomas Arthur Ward … [et al.]. (2010) [Research Reports] (Unpublished)

Modelling and control for longitudinal dynamics of aircraft system / Nurbaiti Wahid, Mohd Aldrin Ali & Nordiana Mukahar. (2012) [Research Reports] (Unpublished)

This list was generated on Fri Apr 19 16:25:22 2024 UTC.