Items where Subject is "Composite materials."

Article

The characterization of the sandwich composite consisted of coconut fibre-polyester resin and its variations of wood core / Sumarji … [et al.]. (2023) Journal of Mechanical Engineering (JMechE), 20 (3): 14. pp. 279-291. ISSN 1823-5514 ; 2550-164X

Electrical resistivity, thermal stability and tensile strength of rice husk flour-plastic waste composites / Shahril Anuar Bahari, Kamrie Kamlon and Masitah Abu Kassim. (2012) Scientific Research Journal, 9 (2). pp. 49-64. ISSN 1675-7009

Metals composition in low cost apartment in Kuala Lumpur / Zitty Sarah Ismail … [et al.]. (2019) Science Letters (ScL), 13 (2): 7. pp. 18-24. ISSN eISSN: 2682-8626

Hardness of Flowable Resin Composite from Rice Husk / Nazrul M. Yusoff ...[et al.]. (2018) Journal of Mechanical Engineering (JMechE), SI 5 (2). pp. 181-190. ISSN 18235514

Failure analysis of fiber reinforced composite materials used in Malaysian industries / Jamaluddin Mahmud, Wahyu Kuntjoro and Aidah Jumahat. (2007) Scientific Research Journal, 4 (2). pp. 41-53. ISSN 1675-7009

Physico-mechanical properties of thermoplastic composite reinforced with kelempayan, oil palm trunk and bamboo as fillers / Siti Zalifah Mahmud … [et al.]. (2022) Scientific Research Journal, 19 (1). pp. 115-131. ISSN 2289-649X

Mechanical properties of coconut shell powder reinforced PVC composites in automotive applications / Muhammad Hanafi Md Sah … [et al.]. (2017) Journal of Mechanical Engineering (JMechE), 14 (2). pp. 49-61. ISSN 1823-5514 ; 2550-164X

Influences of main machining process parameters and tool wear on the machining damage generated during edge milling CFRP composites / Nguyen Thi-Hue and Nguyen Dinh-Ngoc. (2023) Journal of Mechanical Engineering (JMechE), 20 (3): 18. pp. 355-370. ISSN 1823-5514 ; 2550-164X

Kesan rawatan gentian ke atas tenaga hentaman dan purata panjang gentian dalam komposit TPNR / Syed Yusainee Syed Yahya, Sahrim Ahmad and lbrahim Abdullah. (1999) Gading Business and Management Journal, 5 (2). pp. 1-10. ISSN 0128-5599

Application of response surface methodology for parameters optimization in hot pressing kenaf reinforced biocomposites / Izdihar Tharazi... [et al.]. (2020) Journal of Mechanical Engineering (JMechE), 17 (3). pp. 131-144. ISSN 1823-5514 ; 2550-164X

Book Section

The new development of centrifugal cruncher system for composite material application / Muhammad Iqbal Ahmad … [et al.]. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka. (Submitted)

Different mould design for the manufacture of composite products / Mohd Jafni Hashim … [et al.]. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka. ISBN 9789671135440 (Submitted)

Design study on façade of high-deck bus using FRP composite / Mohammad Yusof Shaharuddin … [et al.]. (2012) In: RIID 2012: Innovation For Sustainable Growth. Bahagian Penyelidikan dan Jaringan Industri, UiTM Melaka, Alor Gajah, Melaka. ISBN 9789671135440 (Submitted)

Conference or Workshop Item

Effect of kenaf fibre and rice husk incorporation on melt flow and mechanical properties of calcium carbonate/Polypropylene hybrid composite / Mohd Muizz Fahimi Mohamed and Rahmah Mohamed. (2015) In: Proceedings of Postgraduate Conference on Global Green Issues (Go Green), 7-8 October 2015, Dewan Kuliah Al-Khawarizmi Universiti Teknologi MARA Cawangan Perak.

Thesis

Q-switching and mode-locking pulse generation based on passive techniques / Amri Ab. Rahman. (2015) PhD thesis, thesis, Universiti Teknologi MARA.

Resistivity characteristics of Conductive Rubber Sheet and Quantum Tunnelling Composite Pills for robotic hand tactile sensing application / Ahsana Aqilah Ahmad. (2014) Masters thesis, thesis, Universiti Teknologi Mara.

Effect of holes for different layer of composite material (epoxy/polypropylene laminates) / Zahari Ahmad. (2001) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Fabrication and experimental investigation on filament wound composite / Sharzali Che Mat. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Effects of various environments on tensile properties, flexural properties and fracture toughness of kenaf fibre reinforced unsaturated polyester (KFRP) composites / Farizah Adliza Ghazali. (2010) Masters thesis, thesis, Universiti Teknologi MARA.

The optimization of lamination scheme and ply thickness for laminated composite plates / Hamedan Ibrahim. (2004) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Humidity sensing performance of aligned assembly tin-doped zinc oxide nanocomposited films via low temperature immersion method / Ahmad Syakirin Ismail @ Rosdi. (2019) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Study on tensile and flexure performance of hybrid composite / Abd. Halim Ithnin. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Impact performance and fracture toughness of PMC and PMC/FRP composite / Mohammad Helmi Jusoh @ Ibrahim. (2004) Degree thesis, thesis, Universiti Teknologi MARA.

Study on tensile and flexure performance of hybrid composite / Mohammad Hafidz Mad Nordin. (2002) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Simulation and failure analysis of fibre-reinforced composite laminates under various load and boundary conditions / Mohamad Mali. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

The structural behaviour of prefabricated wall constructed using wood-wool cement composite panel / Mohammad Soffi Md Noh. (2020) PhD thesis, thesis, Universiti Teknologi MARA.

The behaviour of alumina reinforce metal matrix composite with nanosized particle addition / Jamaliah Md Said. (2011) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Damage tolerance of nanosilica filled basalt FRP – Al foam sandwich panel / Nurul Emi Nor Ain Mohammad. (2022) PhD thesis, thesis, Universiti Teknologi MARA (UiTM).

Numerical simulation of failure prediction on composite laminates with various cutout shapes under uniaxial tension and compression / Nurdalilah Noordin. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Finite element method (FEM) approach towards composite material / Ahmad Shehan Nordin. (2002) Degree thesis, thesis, Universtiti Teknologi MARA (UiTM).

Fabrication and experimental investigation on filament wound composite / Khairil Anuar Othman. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

The optimization of anti-symmetric laminate / Rafhan Paharal Radzi. (2005) Degree thesis, thesis, Universiti Teknologi MARA (UiTM).

Physical and mechanical properties of magnetic iron filled rubber composites / Nurul Husna Rajhan. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Experimental-numerical analysis of kaolin-silicone biocomposites / Ahmad Faridzal Rosli. (2021) Masters thesis, thesis, Universiti Teknologi MARA.

Environmental stress cracking behaviour of polyester reinforced kenaf composite / Nurul Shakirah Shuhaimen. (2017) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Comparative study on the behaviour of the concrete sleepers / Ruzitah Supinyeh. (1992) Diploma thesis, thesis, Universiti Teknologi MARA.

Technical viability of using eggshells powder in concrete mix / Fazeera Ujin. (2018) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Properties and morphological characterization of HDPE/kenaf/nanoclay composites by using single screw extruder / Mohamad Asnawi Ya'acob. (2016) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Preparation and characterization of MEH-PPV:ZnO nanocomposite thin films / Nurul Zayana Yahya. (2015) Masters thesis, thesis, Universiti Teknologi MARA.

Failure analysis of boron/glass hybrid composite laminates with various cutouts shapes and sizes under biaxial tension / Muhammad Amir Azhan Zulkifli. (2022) Masters thesis, thesis, Universiti Teknologi MARA (UiTM).

Student Project

Properties of oil palm frond - plastic composite (elaeis guineensis) / Muhammad Hafiz Abd Kadir. (2012) [Student Project] (Unpublished)

The environmental effect on tensile strength and modulus of elasticity of PP/cloth composite / Mohd Iswandi Abdul Aziz and Wan Azman Wan Alwi. (2001) [Student Project] (Unpublished)

The properties of three layer particleboard from oil palm fronds (elaeis guineensis) / Hammad Asyraf Abdul Rahman. (2013) [Student Project] (Unpublished)

The manufacturing in composite materials in Malaysian's industry / Nur Afni Abdullah and Rafidah Kamaruddin. (2003) [Student Project] (Unpublished)

Design of test fixture for high cycle fatigue test of fiber-reinforced composite laminates / Mohd Zul-Azri Daud. (2002) [Student Project] (Unpublished)

Properties of composite board from dried leaves in UiTM Pahang campus / Nur Afiqah Israruddin. (2017) [Student Project] (Unpublished)

Investigation on effectiveness of different binder in geocomposite / Sayani Khorim. (2006) [Student Project] (Unpublished)

Design test fixture for high cycle fatigue on polymer mixed concrete / Rosliezan Md Husain and Yusnizam Abd Jalil. (2004) [Student Project] (Unpublished)

A study of concrete performance using treated kaolin as a partial replacement in cement / Mohd Shahmin Mohammad Shater. (2019) [Student Project] (Unpublished)

Study on concrete performance using treated POFA as a partial replacement of cement / Mohd Afiq Mohd Azham. (2019) [Student Project] (Unpublished)

Advanced composite materials in aircraft applications / Mohd. Nizam Mohd. Zain and Mohd. Nazirudin Tahir. (2000) [Student Project] (Unpublished)

Investigation on compressive characteristic of waste material geocomposite / Endy Raymond. (2007) [Student Project] (Unpublished)

Propulsion system design of glass reinforced bedar / Ahmad Syafiq Aizat Saule. (2022) [Student Project] (Unpublished)

Application of composite materials in golf club / Faidzal Sany Shaari and Kamal Asyraf Ramli. (2004) [Student Project] (Unpublished)

Effectiveness of crushed coconut shell and eggshell powder to act as subgrade stabilizer / Noryani Natasha Yahaya. (2019) [Student Project] (Unpublished)

Simulation of a flow over a underwater pillar of different surface roughness using computational approach / Harith Asyran Zulkffli. (2022) [Student Project] (Submitted)

Research Reports

An intelligent optical fibre Al(lll) sensor based on advanced materials-sol-gel & polyaniline-porous nanocomposite / Faiz Bukhari Mohd Suah, Abdul Mutalib Md Jani and Mohd Nasir Taib. (2006) [Research Reports] (Unpublished)