Browse by Division for RSS

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | H | J | K | M | P | S | T | V | W | Z
Number of items at this level: 33.

A

Ab Hamid, Atikah (2015) Finishing properties of shellac by using different viscosity and abrasive paper applied on sepetir (sindora spp.) / Atikah Ab Hamid. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Abd Halim, Nur Afiqah (2015) Properties of low density particleboard made from oil palm trunk (OPT) / Nur Afiqah Abd Halim. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Abdullah Sani, Nur Aini Adawiyah (2015) Bending strength of bonded three selected malaysian timber species (sepetir, kelat and sesendok) with polyvinyl acetate (pvac) / Nur Aini Adawiyah Abdullah Sani. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Amat Sa'aidi, Muhammad Zakwan (2015) Buffer capacity effect of meranti pa'ang (shorea bracteolata) and sesenduk (endospermum diadenum) on the reactivity of urea formaldehyde and phenol formaldehyde adhesive / Muhammad Zakwan Amat Sa'aidi. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

B

Bahrim, Ahmad Ariffuddin (2015) Properties of insulation board made from rice husk and waste paper / Ahmad Ariffuddin Bahrim. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

H

Hairuddin, Mohamad Dzulhelme (2015) Mechanical and physical properties of acacia mangium spp forwood cement board relation to particle size and cement ratio. Student Project. Faculty Of Applied Science, Jengka, Pahang. (Unpublished)

Haris, Zainab (2015) Properties of oriented strand board (osb) from acacia mangium and rubberwood. Student Project. Faculty Of Applied Science, Jengka, Pahang. (Unpublished)

J

Jamal, Nur Syazwanie (2015) Physical and mechanical properties of bayas wood (oncospema horridum) / Nur Syazwanie Jamal. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Julie, Diana (2015) Physical and mechanical properties of three layered particleboard from kelempayan (neolamarckia cadamba) and sawmill sawdust. Student Project. Faculty Of Applied Science, Jengka, Pahang. (Unpublished)

K

Khalil, Mohammad Zahin (2015) Properties of wood plastic composite by using hibiscus cannabinus spp. (kenaf) as a raw material / Mohammad Zahin Khalil. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

M

M. Omar, Siti Nadrah (2015) Properties of bio-composite products from acacia strand and coconut veneer. Student Project. Faculty Of Applied Science, Jengka, Pahang. (Unpublished)

Marzuki, Mazlinda (2015) Properties of particleboard made from rice husks and coconut husks in relation of varying resin content and board density. Student Project. Faculty Of Applied Science, Jengka, Pahang. (Unpublished)

Masir, Muhammad Nabil Irsyad (2015) Effect of alkaline percentages on wood plastic composites properties / Muhammad Nabil Irsyad Masir. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Mohamad Noor, Abdul Hakim Baihaqi (2015) Influence of oil palm trunk (elaeis guineensis) and acacia (acacia mangium) on the particleboard properties. Student Project. Faculty Of Applied Science, Jengka, Pahang. (Unpublished)

Mohd Adzha, Nur Athirah (2015) Design of multipurpose table based on anthropometric data / Nur Athirah Mohd Adzha. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Mohd Azhar, Mohamad Alif Aizat (2015) Properties of acacia mangium wood cement board in relation to particle size and additives (na2si03). Student Project. Faculty Of Applied Science, Jengka, Pahang. (Unpublished)

Mohd Hamidi, Fathin Shahirah (2015) Finishing properties of two selected types of coating materials on sepetir wood / Fathin Shahirah Mohd Hamidi. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Mohd Hatta, Abdul Halim (2015) Effect of the resin content and density on the properties of three layer particleboard from kelempayan (neolamarckia cadamba) and wood shaving. Student Project. Faculty Of Applied Science, Jengka, Pahang. (Unpublished)

Mohd Nizam, Nursyuhada (2015) Anatomical properties of kelempayan (neolamarckia cadamba) / Nursyuhada Mohd Nizam. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

P

Philip, Jonity (2015) The performance of particleboard made from rice husk and coconut husk based on type density and type of raw material. Student Project. Faculty Of Applied Science, Jengka, Pahang. (Unpublished)

S

Saffuan, Norsyazwani (2015) Fiber morphology and anatomical properties of mendong wood (elaeocarpus spp.) in Malaysia / Norsyazwani Saffuan. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Sajali, Nur Aisah (2015) Screw withdrawal properties of glue-laminated timber made from kelampayan and sesendok / Nur Aisah Sajali. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Sakiman, Mohammad Akhmal (2015) Properties of particleboard from oil palm trunk in relation to resin content and wax addition / Mohammad Akhmal Sakiman. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Saleh, Mohamad Syazwan (2015) Hybrid particleboard properties from acacia mangium and 'petal relalang' (leucaena leucocephala) using urea-formaldehyde resin. Student Project. Faculty Of Applied Science, Jengka, Pahang. (Unpublished)

Seraila, Azlan (2015) Influence of particle sizes in homogenous and heterogeneous wood cement board properties made from acacia mangium. Student Project. Faculty Of Applied Science, Jengka, Pahang. (Unpublished)

Supangat, Noor Shafiqah (2015) Finishing properties of lacquer by using different methods of application on sepetir / Noor Shafiqah Supangat. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Suratman, Nur Othman (2015) Properties of medium density fiberboard from rubberwood and leucaena in relation to wood ratio and resin content. Student Project. Faculty Of Applied Science, Jengka, Pahang. (Unpublished)

T

Tuan Ismail, Tuan Mohd Fakrul (2015) Effect of varying resin content and board densities on the properties of three layers particleboard from kelempayan. Student Project. Faculty Of Applied Science, Jengka, Pahang. (Unpublished)

V

Vanessa, Alexander (2015) Buffer capacity effects of delonix regia and hevea brasiliensis extractives on reactivity of selected adhesives / Alexander Vanessa. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

W

Wan Hassan, Wan Hazwani (2015) Properties of hybrid particleboard from acacia mangium and petal belalang using phenol formaldehyde resin. Student Project. Faculty Of Applied Science, Jengka, Pahang. (Unpublished)

Wan Omar, Wan Jamalludin (2015) Properties of hybrid particleboard from acacia (acacia mangium) and oil palm trunk (elaeis guineensis). Student Project. Faculty Of Applied Science, Jengka, Pahang. (Unpublished)

Z

Zahari, Mohd Haziq Zulfadhli (2015) Properties of hybrid board from rice husk and rubberwood fiber / Moho Haziq Zulfadhli Zahari. Student Project. Faculty of Applied Sciences, Jengka, Pahang. (Unpublished)

Zawil Anuar, Muhammad Zahid Akmal (2015) Properties of nail withdrawal holdings on kelempayan timber (neolamarckia cadamba) / Muhammad Zahid Akmal Zawil Anuar. Student Project. Faculty Of Applied Sciences, Jengka, Pahang. (Unpublished)

This list was generated on Wed Oct 31 17:15:31 2018 +08.