Items where Division is "Faculty of Mechanical Engineering" and Year is 2015

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | D | G | H | I | J | M | N | R | S | W | Y
Number of items: 31.

A

Abd Malek, Muhamad Hafiz (2015) Performance analysis of thermal arc spray aluminium coating as a sacrificial anode / Muhamad Hafiz Abd Malek. Masters thesis, Universiti Teknologi MARA.

Abdol Rahim, Abdul Hadi and Tijani, Alhassan Salami and Shukri, Farah Hanun (2015) Simulation analysis of the effect of temperature on overpotentials in PEM electrolyzer system / Abdul Hadi Abdol Rahim, Alhassan Salami Tijani and Farah Hanun Shukri. Journal of Mechanical Engineering, 12 (1). pp. 47-65. ISSN 1823-5514

Abdul Ghaffar, Zulkifli (2015) Investigation of swirl effervescent atomization using design of experiment and photographic-based technique / Zulkifli Abdul Ghaffar. Masters thesis, Universiti Teknologi MARA.

Abdul Rahman, Norhanifah (2015) Wear characterization by oil analysis in automatic and manual bus engine gearbox / Norhanifah Abdul Rahman. Masters thesis, Universiti Teknologi MARA.

Adenan, Mohd Shahriman (2015) Characterization of surface layer development on duplex stainless steel resulting from thermochemical hybrid treatment / Mohd Shahriman Adenan. PhD thesis, Universiti Teknologi MARA.

Adull Manan, Nor Fazli and Mahmud, Jamaluddin (2015) The effect of skin orientation on biomechanical properties / Nor Fazli Adull Manan and Jamaluddin Mahmud. Journal of Mechanical Engineering, 12 (1). pp. 67-81. ISSN 1823-5514

Ahmad Jalaludin, Helmisyah (2015) Investigation on heat transfer characteristics of ceramic coated piston crown for a CNGDI engines / Helmisyah Ahmad Jalaludin. Journal of Mechanical Engineering, 12 (1). pp. 1-17. ISSN 1823-5514

Amir, Widia Wahyuni (2015) Characterization and flexural properties of nanoclay-modified fiber reinforced polymer composites / Widia Wahyuni Amir. Masters thesis, Universiti Teknologi MARA.

Aziz, Norheliena (2015) A model-based approach for strategy planning of collaborative humanoid soccer robot / Norheliena Aziz. Masters thesis, Universiti Teknologi MARA.

D

Deraman@Abd Rahman, Syarifah Noor (2015) Investigation of binaural beats and isochronic tones on beta and gamma brain wave frequencies / Syarifah Noor Deraman@Abd Rahman. Masters thesis, Universiti Teknologi MARA.

Dung, Duong Viet and Zuhal, Lavi Rizki and Muhammad, Hari (2015) Two-dimensional fast lagrangian vortex method for simulating flows around a moving boundary / Duong Viet Dung, Lavi Rizki Zuhal and Hari Muhammad. Journal of Mechanical Engineering, 12 (1). pp. 31-46. ISSN 1823-5514

G

Gokool, Trishel and Ali, Fahraz and Chowdary, Boppana V. and Kanchan, Kimberly (2015) Computer aided engineering approach to the development of a lawnmower blade: a reverse engineering application to reduce noise levels / Trishel Gokool … [et al.]. Journal of Mechanical Engineering, 12 (2). pp. 50-70. ISSN 1823-5514

H

Hadi, Bambang K. and Ghofur, Muhammad A. and Permana, Indra (2015) The design of a high aspect ratio HALE aircraft composite wing. part I: static strength analysis / Bambang K. Hadi, Muhammad A. Ghofur and IndraPermana. Journal of Mechanical Engineering, 12 (2). pp. 2-11. ISSN 1823-5514

Hadi, Bambang K. and Permana, Indra (2015) The design of a high aspect ratio HALE aircraft composite wing. part II: buckling and flutter speed analysis / Bambang K. Hadi and IndraPermana. Journal of Mechanical Engineering, 12 (2). pp. 14-25. ISSN 1823-5514

Hamid, Aminuddin (2015) Real-time measurement and gait detection algorithm for motion control of active ankle foot orthosis / Aminuddin Hamid. Masters thesis, Universiti Teknologi MARA.

I

Ismail, Noor Iswadi (2015) Aerodynamic performances of twist morphing MAV wing / Noor Iswadi Ismail. PhD thesis, Universiti Teknologi MARA.

J

Jamaludin, Mohamad Ikhwan (2015) Development of porous TI-6AL-4V mix with palm stearin binder by metal injection moulding technique / Mohamad Ikhwan Jamaludin. Masters thesis, Universiti Teknologi MARA.

M

Mohapatra, Kailash and Mishra, Dipti Prasad (2015) Numerical investigation of heat transfer and fluid flow characteristics of an internally ribbed tube / Kailash Mohapatra and Dipti Prasad Mishra. Journal of Mechanical Engineering, 12 (2). pp. 86-103. ISSN 1823-5514

Mohd Ali, Zurriati (2015) Effects of canard configuration on the aerodynamics of blended wing body at low mach number / Zurriati Mohd Ali. PhD thesis, Universiti Teknologi MARA.

Mohd Alias, Mohd Shahrudin and Saad, Nor Hayati and Saedon, Juri and Hassan, Nor Hidayahti and Harun, Saidi (2015) Analysis on the factors and effects of engine tapping noise by Design of Experiment (DOE) / Mohd Shahrudin Mohd Alias … [et al.]. Journal of Mechanical Engineering, 12 (2). pp. 28-47. ISSN 1823-5514

Mohd Noor, Siti Noor Azizzati (2015) Hyperelastic constitutive analysis of silicone sheet as skin substitute / Siti Noor Azizzati Mohd Noor. Masters thesis, Universiti Teknologi MARA.

Mohd Yusop, Siti Hajar (2015) Investigating the biomechanical properties of fresh goat skin, natural dried skin and leather / Siti Hajar Mohd Yusop. Masters thesis, Universiti Teknologi MARA.

Muhammad, Norasiah (2015) Model development of resistance spot welding on low carbon steel and advanced high strength steel using multiresponse DOE and FEM / Norasiah Muhammad. PhD thesis, Universiti Teknologi MARA.

N

Nor Ma'arof, Muhammad Izzat (2015) Information architecture & mathematical modelling to optimally 'fit' human operator on motorcycle / Muhammad Izzat Nor Ma'arof. PhD thesis, Universiti Teknologi MARA.

R

Resali, Nor Azrina (2015) Corrosion behavior of nanocrystalline conife electrodeposited on stainless steel / Nor Azrina Resali. PhD thesis, Universiti Teknologi MARA.

S

Shamsuddin, Syamimi (2015) Development of human-robot interaction (HRI) methodology for autism rehabilitation using humanoid robot with a telerehabilitation platform / Syamimi Shamsuddin. Masters thesis, Universiti Teknologi MARA.

Sidik, Amar (2015) Performance of a free standing air-cooled condensing unit in a confined space in hot and humid climates / Amar Sidik. Masters thesis, Universiti Teknologi MARA.

W

Waluyo, Sugeng (2015) Accuracy improvement for linear tetrahedral finite element by means of virtual mesh refinement / Sugeng Waluyo. Journal of Mechanical Engineering, 12 (1). pp. 19-30. ISSN 1823-5514

Wan Mohamad, Wan Sulaiman and Mat Isa, Ahmad Azlan and Ismail, M.A (2015) A study of single and two-plane balancing using influence coefficient method / Wan Sulaiman Wan Mohamad, Ahmad Azlan Mat Isa and M.A Ismail. Journal of Mechanical Engineering, 12 (1). pp. 83-97. ISSN 1823-5514

Y

Yaakob, Mohd Amiruddin Fikri (2015) Development of learning algorithm of passive joint for 3R under-actuated robot / Mohd Amiruddin Fikri Yaakob. Masters thesis, Universiti Teknologi MARA.

Yunus, Syarifah and Abdullah, Abdul Hakim and Abdul Halim, Nurul Hayati and Salleh, Zuraidah and Md. Taib, Yakub (2015) Low energy impact on the short kenaf fibre reinforced epoxy composites: effect to the residual strength and modulus / Syarifah Yunus … [et al.]. Journal of Mechanical Engineering, 12 (2). pp. 72-83. ISSN 1823-5514

This list was generated on Fri Nov 24 12:17:44 2017 +08.