Items where Division is "Faculty of Mechanical Engineering" and Year is 2014

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | G | H | I | J | K | M | P | R | S | Y
Number of items: 34.

A

A.M.H., Abdul Jalil and Kuntjoro, Wahyu and Abdullah, Shahrum and Mohd Ihsan, Ahmad Kamal Ariffin (2014) Identification of the maximum stress value that occur at The wing-fuselage joints at 1-G symmetrical level flight condition / Abdul Jalil A.M.H. … [et al.]. Journal of Mechanical Engineering, 11 (2). pp. 79-91. ISSN 1823-5514

Abd Rahim, Siti Noraida and Sulaiman, Alawi and Edama, Nurul Aini (2014) Kinetics of tapioca slurry saccharification process using immobilized multi-enzyme system enhanced with Sg. Sayong clay / Siti Noraida Abd Rahim, Alawi Sulaiman and Nurul Aini Edama. Journal of Mechanical Engineering, 11 (2). pp. 67-77. ISSN 1823-5514

Abd. Rahman, Haizuan (2014) Dynamic characteristics of damage and healthy for fiberglass reinforced epoxy using operational modal analysis / Haizuan Abd. Rahman. Masters thesis, Universiti Teknologi MARA.

Abdul Latip, Syazuan (2014) Degradation and wear analysis of automatic transmission fluid (ATF) of 1.3l automatic transmission (AT) vehicle / Syazuan Abdul Latip. Masters thesis, Universiti Teknologi MARA.

Abu Bakar, Mohd Sarizal (2014) Improved welding refurbishment procedure for superalloys gas turbine using fea with experimental verification / Mohd Sarizal Abu Bakar. Masters thesis, Universiti Teknologi MARA.

Abu Kasim, Mohamad Amlie (2014) Development of hybrid actuation mechanism for prosthetic finger / Mohamad Amlie Abu Kasim. Masters thesis, Universiti Teknologi MARA.

Adnan, Ahmad Naufal (2014) Just in time production implementation through lean manufacturing principles / Ahmad Naufal Adnan. Masters thesis, Universiti Teknologi MARA.

Ahmad, Ahsana Aqilah (2014) Resistivity characteristics of Conductive Rubber Sheet and Quantum Tunnelling Composite Pills for robotic hand tactile sensing application / Ahsana Aqilah Ahmad. Masters thesis, Universiti Teknologi Mara.

Ahmad, Mohamad Ali (2014) Oil film behaviour in hydrodynamic lubrication of journal bearing / Mohamad Ali Ahmad. PhD thesis, Universiti Teknologi MARA.

Ahmad Hamidi, Shahfuan Hanif (2014) The performance of small wire submerged arc welding on carbon steel / Shahfuan Hanif Ahmad Hamidi. Masters thesis, Universiti Teknologi MARA.

G

Ghafar, Halim (2014) Biochar from fixed bed biomass carbonization in various pyrolizing environments / Halim Ghafar. Masters thesis, Universiti Teknologi MARA.

H

Harun, Mohd Hanif and Wan Abdullah, Wan Mohd Zailimi and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan and Hudha, Khisbullah (2014) Analysis of primary and secondary lateral suspension system of railway vehicle / Mohd Hanif Harun … [et al.]. Journal of Mechanical Engineering, 11 (2). pp. 19-40. ISSN 1823-5514

Huck-Soo, Loo and Saad, Nor Hayati and Mohammed Redza, Mohd. Ridhwan (2014) Ergonomics intervention in steel panels handling for improving workers' well-being outcomes / Huck-Soo Loo … [et al.]. Journal of Mechanical Engineering, 11 (2). pp. 93-105. ISSN 1823-5514

I

I. Ahmed, Diyar (2014) Formulation, performance evaluation and prediction of bio-lubricant for journal bearings / Diyar I. Ahmad. PhD thesis, Universiti Teknologi MARA.

J

Jenal, Norhisyam (2014) Performance analysis of a hydrogen proton exchange membrane fuel cell propulsion system for unmanned aerial vehicle / Norhisyam Jenal. Masters thesis, Universiti Teknologi MARA.

K

Katon, Matzaini (2014) Design for modularity of Blended Wing Body (BWB) baseline ii-E2 Unmanned Aerial Vehicle (UAV) / Matzaini Katon. Masters thesis, Universiti Teknologi MARA.

Khusaini, Nurul Syuhadah (2014) Development of Lean ISO 9001:2008 theoretical framework using RASCH model in Malaysian food and beverages industry / Nurul Syuhadah Khusaini. Masters thesis, Universiti Teknologi MARA.

M

Marwan, Shahrul Hisyam (2014) Human skull 3D model development and biomechanical analysis in full frontal crash / Shahrul Hisyam Marwan. Masters thesis, Universiti Teknologi MARA.

Md. Nasir, Ramdziah (2014) Water-lubricated pin-on-disc tests with natural fibre reinforced matrix / Ramdziah Md. Nasir. Journal of Mechanical Engineering, 11 (2). pp. 41-51. ISSN 1823-5514

Mohamad, Noraiham and Zainol, Nur Sharafina and Rahim, Faisal Faris and Mohd Salleh, Mohd Khuzaimi and Azam, Mohd Asyadi and Yaakob, Mohd Yuhazri and Abd Manaf, Mohd Edeerozey and Ab Maulod, Hairul Effendy and Abdollah, Mohd Fadzli (2014) Interaction of mixing factors with mechanical properties of PP/ENR blend via response surface methodology / Noraiham Mohamad … [et al.]. Journal of Mechanical Engineering, 11 (1). pp. 1-13. ISSN 1823-5514

Mohd Rodzi, Ana Syahidah (2014) Study on nanostructured zinc oxide thin films characteristics / Ana Syahidah Mohd Rodzi. Masters thesis, Universiti Teknologi MARA.

Mohd Salleh, Noor Azlina (2014) Design and development of integrated quality management model based on TQM, LM and EMS in Malaysian automotive companies / Noor Azlina Mohd Salleh. PhD thesis, Universiti Teknologi MARA.

Mohd Ziyadi, Ahmad Zulhilmi (2014) Computer algorithm for automated detection of intramedullary rod hole position and orientation / Ahmad Zulhilmi Mohd Ziyadi. Masters thesis, Universiti Teknologi MARA.

Muhammad Zain, Norazwani and Ahmad, Sahrim and Ali, Ernie Suzana (2014) Enhancement of adhesive bonding strength: surface roughness and wettability characterisations / Norazwani Muhammad Zain, Sahrim Hj Ahmad and Ernie Suzana Ali. Journal of Mechanical Engineering, 11 (1). pp. 55-73. ISSN 1823-5514

P

Paijan, Lailatul Harina (2014) The study of structural development of expanded austenite on duplex stainless steel by low temperature thermochemical nitriding process / Lailatul Harina Paijan. Masters thesis, Universiti Teknologi MARA.

Perumal, D. Arumuga and Gowhar, I.M. and Ananthapuri, S.A. and Jayakrishnan, V. (2014) Computation of temperature distributions on uniform and non-uniform lattice sizes using mesoscopic lattice boltzmann method / D. Arumuga Perumal … [et al.]. Journal of Mechanical Engineering, 11 (2). pp. 53-65. ISSN 1823-5514

R

Ramly, Ramzyzan (2014) Delamination monitoring of honeycomb composite for aircraft structure using fiber bragg gratings / Ramzyzan Ramly. PhD thesis, Universiti Teknologi MARA.

S

Sabur, Abdus and Ali, Mohammad Yeakub and Maleque, Md Abdul and Idris, S. (2014) Modelling of material removal rate in electro discharge machining of nonconductive ZrO₂ Ceramic with kerosene and EDM oil dielectric fluid / Abdus Sabur … [et al.]. Journal of Mechanical Engineering, 11 (1). pp. 31-43. ISSN 1823-5514

Salleh, Zuraidah (2014) A study on the post impact and open hole tensile strength of kenaf and kenaf/fibreglass hybrid reinforced composite / Zuraidah Salleh. PhD thesis, Universiti Teknologi MARA.

Shahin, Ibrahim and Gadala, Mohamed and Alqaradawi, Mohamed and Badr, Osama (2014) Dry gas seat simulation with different spiral tapered grooves / Ibrahim Shahin … [et al.]. Journal of Mechanical Engineering, 11 (2). pp. 1-17. ISSN 1823-5514

Singh, Baljit and Lippong, Tan and Date, Abhijit and Akbarzadeh, A. (2014) The effects of temperature difference and compressive force to the electrical characterization of peltier cell for artificial concentrated solar power thermoelectric application / Baljit Singh ... [et al.]. Journal of Mechanical Engineering, 11 (1). pp. 15-30. ISSN 1823-5514

Sulaiman, Mohd Shahar (2014) Investigation on weld induced distortion using simulation and experimental study / Mohd Shahar Sulaiman. Masters thesis, Universiti Teknologi MARA.

Sulaiman, Shaharin Anwar and Mohd Zin, Nurul Aisyah (2014) On gasifier cookstove operation fuelled by different lignocellulosic biomass materials / Shaharin Anwar Sulaiman and Nurul Aisyah Mohd Zin. Journal of Mechanical Engineering, 11 (1). pp. 45-54. ISSN 1823-5514

Y

Yaakub, Mohamad Yazman (2014) Predicting the welding parameters and deposition geometry of gas metal arc welding process for fillet / Mohamad Yazman Yaakub. Masters thesis, Universiti Teknologi MARA.

This list was generated on Sun Sep 24 07:37:09 2017 MYT.