Items where Division is "Faculty of Mechanical Engineering" and Year is 2013

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | G | I | L | M | R | W
Number of items: 16.

A

Abdullah, Wan Normimi Roslini (2013) Synthesis and characterization of electrodeposited cobaltiron nanoparticles on different substrates / Wan Normimi Roslini Abdullah. Masters thesis, Universiti Teknologi MARA.

Abu Kasim, Haszeme and Kuntjoro, Wahyu (2013) Stress analysis of radial and non- radial nozzle connections in ellipsoidal head pressure vessel / Haszeme Abu Kasim and Professor Dr. Ir. Journal of Mechanical Engineering, 10 (1). pp. 67-83. ISSN 1823-5514

Aziz, Mohd Rozaiman and Kuntjoro, Wahyu and Natarajan, Valliyappan David and Ahmad, Roslan (2013) Ballistic resistance analysis of non-filled tank against fragment simulating projectile (FSP) / Mohd Rozaiman Aziz … [et al.]. Journal of Mechanical Engineering, 10 (2). pp. 75-91. ISSN 1823-5514

G

Gunawan, Leonardo and Sitompul, Ichsan Setya and Dirgantara, Tatacipta and Putra, Ichsan Setya and Hoon, Huh (2013) Material characterization and axial crushing tests of single and double-walled columns at intermediate strain rates / Leonardo Gunawan … [et al.]. Journal of Mechanical Engineering, 10 (2). pp. 19-36. ISSN 1823-5514

I

Iryani, Lenny and Dirgantara, Tatacipta and Mihradi, Sandro and Putra, Ichsan Setya (2013) The effect of DIC parameters in the measurement of stress intensity factors Kı and Kıı / Lenny Iryani … [et al.]. Journal of Mechanical Engineering, 10 (1). pp. 17-33. ISSN 1823-5514

Ismail, Mohd Zahid (2013) Effective content management and delivery methods using open access strategy / Mohd Zahid Ismail. PhD thesis, Universiti Teknologi MARA.

L

Loo, Huck-Soo and Paul, H.P. Yeow and Balakrishnan, Vimala (2013) Low cost redesign of coil assemblies for ergonomic improvements / Loo Huck-Soo, Paul H.P. Yeow and Vimala Balakrishnan. Journal of Mechanical Engineering, 10 (1). pp. 35-47. ISSN 1823-5514

M

Mohamed, Azmi (2013) Non-contact approach of roundness inspection for machined parts / Azmi Mohamed. PhD thesis, Universiti Teknologi MARA.

Mohandas, K. N. and Ramesh, C. S. and Koorapati, Eshwara Prasad (2013) Prediction of cutting forces developed during hard turning of hard chrome plated surfaces on EN24 substrate / K. N. Mohandas, C. S. Ramesh and Eshwara Prasad Koorapati. Journal of Mechanical Engineering, 10 (1). pp. 49-65. ISSN 1823-5514

Mohd Nasir, Rizal Effendy (2013) Longitudinal flight dynamics and stability of blended wing-body unmanned aerial vehicle with canard as control surface / Rizal Effendy Mohd Nasir. PhD thesis, Universiti Teknologi MARA.

Mohd Nasir, Rizal Effendy and Kuntjoro, Wahyu (2013) Stability augmentation for longitudinal modes of a small blended wing-body aircraft with canard as control surface / Rizal Effendy Mohd Nasir and Wahyu Kuntjoro. Journal of Mechanical Engineering, 10 (2). pp. 37-51. ISSN 1823-5514

Mohd Zulkipli, Mohd Faizul Idham (2013) Investigation on phases transformation and mechanical properties of ductile iron by new heat treatment process / Mohd Faizul Idham Mohd Zulkipli. Masters thesis, Universiti Teknologi MARA.

R

Rajesh, R. and Anand, M. Dev (2013) Experimental investigation on aluminium composite surface machined by electrical discharge machining process using response surface methodology / R. Rajesh and M. Dev Anand. Journal of Mechanical Engineering, 10 (1). pp. 1-15. ISSN 1823-5514

Rao, Posinasetti Nageswara and Zhang, Julie and Eckman, Marry (2013) Experimental study and regression modeling of tool wear in CNC turning operation using soybean based cutting fluid / Posinasetti Nageswara Rao, Julie Zhang and Marry Eckman. Journal of Mechanical Engineering, 10 (1). pp. 85-102. ISSN 1823-5514

W

Wan Mohamed, Wan Ahmad Najmi and Atan, Rahim (2013) Experimental cooling mode variation of an air-cooled PEM fuel cell using second-order thermal analysis / Wan Ahmad Najmi Wan Mohamed and Rahim Atan. Journal of Mechanical Engineering, 10 (2). pp. 53-74. ISSN 1823-5514

Widodo, Akhmad Farid and Zuhal, Lavi Rizki and Muhammad, Hari (2013) Simulation of flow around a flapping wing using two-dimensional vortex method / Akhmad Farid Widodo, Lavi Rizki Zuhal and Hari Muhammad. Journal of Mechanical Engineering, 10 (2). pp. 1-18. ISSN 1823-5514

This list was generated on Sun Sep 24 07:32:21 2017 MYT.