Items where Division is "Faculty of Mechanical Engineering" and Year is 2010

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | C | G | I | J | K | M | P | S | W
Number of items: 17.

A

A Rane, Santosh and Kalamkar, Vilas (2010) Analysis of overhead valve push rod type valve train for off road diesel engine / Santosh A. Rane and Vilas Kalamkar. Journal of Mechanical Engineering, 7 (1). pp. 65-79. ISSN 1823-5514

A. Yunus, M. and Mat Isa, Ahmad Azlan and A. Rahman, Z. and Ali Al-Assadi, Hayder M. A. (2010) The prediction of transmission loss using transfer matrix method / M. A. Yunus … [et al.]. Journal of Mechanical Engineering, 7 (2). pp. 37-51. ISSN 1823-5514

Alias, Siti Khadijah (2010) The effects of niobium addition on mechanical and physical properties of austempered ductile iron / Siti Khadijah Alias. Masters thesis, Universiti Teknologi MARA.

Ayub, Muhammad Azmi and Hynek, Pavel and Jackson, Mike (2010) Modelling of belt-driven high-speed laser beam manipulator / Muhammad Azmi Ayub, Pavel Hynek and Mike Jackson. Journal of Mechanical Engineering, 7 (2). pp. 1-14. ISSN 1823-5514

C

Choubey, Vikas Kumar and Gangwar, Mayank and Dwivedi, J. P. (2010) Springback analysis of thin tubes under torsional loading / Vikas Kumar Choubey, Mayank Gangwar and J. P. Dwivedi. Journal of Mechanical Engineering, 7 (2). pp. 81-102. ISSN 1823-5514

Choubey, Vikas Kumar and Gangwar, Mayank and Dwivedi, J. P. (2010) Torsional springback analysis in thin tubes with non-linear work hardening / Vikas Kumar Choubey, Mayank Gangwar and J. P. Dwivedi. Journal of Mechanical Engineering, 7 (1). pp. 15-34. ISSN 1823-5514

G

Ghazali, Farizah Adliza (2010) Effects of various environments on tensile properties, flexural properties and fracture toughness of kenaf fibre reinforced unsaturated polyester (KFRP) composites / Farizah Adliza Ghazali. Masters thesis, Universiti Teknologi MARA.

I

Ibrahim, Idris and Abdul Jalil, Adibah and A. Sulaiman, Shaharin (2010) The effect of EFI to the carbureted single cylinder four stroke engine / Idris Ibrahim, Adibah Abdul Jalil and Shaharin A. Sulaiman. Journal of Mechanical Engineering, 7 (2). pp. 53-64. ISSN 1823-5514

J

Jagannath, K. (2010) Effect of roughness on journal bearing performance with non-newtonian fluids / K. Jagannath. Journal of Mechanical Engineering, 7 (1). pp. 1-13. ISSN 1823-5514

K

Kalam, Anizah (2010) Characterisation and properties of Oil Palm Fruit Bunch (OPFB)/ Polypropylene (PP) composites, PP Nanoclay/PP and OPFB/PP Nanoclay/PP Hybrid Composites / Anizah Kalam. PhD thesis, Universiti Teknologi MARA.

Khan, Ahsan Ali and Ali, Mohammad Yeakub and Haque, Md. Mohafizul (2010) Effect of discharge current and electrode size on material removal rate and wear ratio in electrical discharge machining / Ahsan Ali Khan, Mohammad Yeakub Ali and Md. Mohafizul Haque. Journal of Mechanical Engineering, 7 (1). pp. 81-90. ISSN 1823-5514

M

Mirabadi, Ahmad and Najafi, M. (2010) Fuzzy based energy management algorithm for hybrid train systems / Ahmad Mirabadi and Najafi M. Journal of Mechanical Engineering, 7 (1). pp. 35-46. ISSN 1823-5514

Murthy, Niranjan and Krishnan, V. and Reddy, A. Chennakesava (2010) Parametric study of heat transfer enhancement using impingement of multiple air jets / Niranjan Murthy, V. Krishnan and A. Chennakesava Reddy. Journal of Mechanical Engineering, 7 (2). pp. 65-79. ISSN 1823-5514

P

Pradhan, Manoj Kumar and Biswas, Chandan Kumar (2010) Investigating the effect of machining parameters on EDMed components a RSM approach / Manoj Kumar Pradhan and Chandan Kumar Biswas. Journal of Mechanical Engineering, 7 (1). pp. 47-64. ISSN 1823-5514

S

Satyanarayana, I. and Gupta, A.V.S.S. Kumara Swami and Kosireddy, Govinda Rajulu (2010) Exergy analysis of supercritical cycle for 1000 MW power generation using without reheat, single and double reheat / I. Satyanarayana, A.V.S.S. Kumara Swami Gupta and Govinda Rajulu Kosireddy. Journal of Mechanical Engineering, 7 (1). pp. 91-107. ISSN 1823-5514

Subuki, Istikamah (2010) Injection moulding of 316L stainless steel powder using palm stearin based binder system / Istikamah Subuki. PhD thesis, Universiti Teknologi MARA.

W

Wan Mohamed, Wan Ahmad Najmi and Atan, Rahim (2010) Computational analysis on thermal performance and coolant flow of an air-cooled polymer electrolyte membrane fuel cell / Wan Ahmad Najmi Wan Mohamed and Rahim Atan. Journal of Mechanical Engineering, 7 (2). pp. 15-36. ISSN 1823-5514

This list was generated on Sun Sep 24 07:27:56 2017 MYT.