Preparation of magnesium-aluminium and zinc-aluminium based layered double hydroxides and their adsorption properties in anionic dye removal / Hj. Abdul Hafiz Hj. Abd Malek

Hj. Abd Malek, Hj. Abdul Hafiz (2014) Preparation of magnesium-aluminium and zinc-aluminium based layered double hydroxides and their adsorption properties in anionic dye removal / Hj. Abdul Hafiz Hj. Abd Malek. Masters thesis, Universiti Teknologi MARA.

Abstract

Layered double hydroxides (LDHs) have been prepared by co-precipitation method containing different ratios of Mg²⁺, Zn²⁺ and Al³⁺ in the brucite layers and different ions of NO₃²⁻ and CO₃2⁻ in the interlayer was used as an adsorbent for the removal of anionic dyes from aqueous solution. LDHs were characterized by used of powder Xray Diffractometer (PXRD), Fourier transform infrared spectroscopy (FTIR), Surface area analyser (BET) and Field emission scanning electron microscope (FESEM). PXRD analysis indicates that the crystallinity of the samples increased with the increased of Mg/Al and Zn/Al ratio. FTIR analysis shows the actual peak of LDHs functional group. BET shows that, the LDHs have high surface area and pore volume of 68.57 m²/g and 0.2532 cc/g. The Images from FESEM analysis exhibit the small flakes of dyes seem to be bound onto the MAN-4-LDH surface. Conventional optimization study was carried out by used of a single parameter at one time such as contact time, concentration, dosage and a solution pH. The results of the optimization study by used of conventional method for various dyes are as follows: golden yellow dye (7 h, 300 ppm, 0.5 g, pH 8) and amido black dye (8 h, 200 ppm, 0.04 g, pH 6). The optimization by used of response surface methodology (RSM) was carried out to remove golden yellow and amido black dyes from aqueous solutions using MAN-4- LDH. The parameters were contact time (1-3 h), solution pH (4-10), adsorbent dosage (0.02-0.04 g) and dye concentration (75-200 mg/L). The optimum conditions derived via RSM during the reaction were a reaction time of 2.98 hours, a dye concentration of 185.74 mg/L, a solution pH of 5.24 and an adsorbent dosage of 0.03 g. The experimental percentage removal was 89.58% under optimum conditions, which compared well with the maximum predicted value of 87.83 %. The parameters used for optimization by used of RSM for amido black dye were contact time (6-8 h), solution pH (4-8), adsorbent dosage (0.2-0.6 g) and dye concentration (50-100 mg/L). The optimum conditions derived via RSM during the reaction were a reaction time of 8.48 hours, a dye concentration of 58.09 mg/L, a solution pH of 6.27 and an adsorbent dosage of 431.24 mg/L. The experimental percentage removal was 85.55 % under optimum conditions, which compared well with the maximum predicted value of 87.95 %.

Metadata

Item Type: Thesis (Masters)
Creators:
Creators
Email / ID Num.
Hj. Abd Malek, Hj. Abdul Hafiz
2009148717
Divisions: Universiti Teknologi MARA, Shah Alam > Faculty of Applied Sciences
Programme: Master of Science
Keywords: Magnesium-aluminium; Zinc-aluminium based; Anionic dye removal
Date: March 2014
URI: https://ir.uitm.edu.my/id/eprint/18280
Edit Item
Edit Item

Download

[thumbnail of TM_ABDUL HAFIZ ABD MALEK AS 14_5.pdf] Text
TM_ABDUL HAFIZ ABD MALEK AS 14_5.pdf

Download (92kB)

Digital Copy

Digital (fulltext) is available at:

Physical Copy

Physical status and holdings:
Item Status:

ID Number

18280

Indexing

Statistic

Statistic details